Information On The Unit - ProMed 620 Instruction Leaflet

I
NFORMATION ON THE UNIT
DE
Before operating the unit for the first time, please check that all
contents have been delivered and that the line voltage is correct.
EN
The supplied power adapter (A) is an electronic power supply
unit intended for an operating voltage of 100 V~ to 240 V~.
FR
Should you require a different plug type for the operation of the
device, you can purchase it from Promed. To change the plug
IT
type, press the release (J) and pull the power plug (K) from the
power supply unit (A). Take the required power plug (K) and
ES
push it back into the power supply unit (A).
NL
• The Promed 620 unit, in combination with the grinding
heads designed for this unit, is ideal for manicures and gentle
RU
pedicures, and is also particularly suitable for use with nail
techniques (nail design).
PL
• The Promed 620 unit uses a high performance motor.
The electronic speed control is used to smoothly set the
SE
speed of the grinding head. The unit can rotate clockwise or
counterclockwise (reversible).
FI
/
ACCESSORIES
• The grinding head holder is able to fixate all commercial
• To store the handpiece (F), use only the provided handpiece
• Always make sure that the grinding head does not come
• Grinding head bits are available at your local specialist retailer
grinding heads with standardized dental size shafts of (ø
2.332 to 2.350 mm / 0.091 - 0.093 inches). Please use only
high-quality grinding heads with a rounded shaft end and a
maximal shaft length of 36 mm (1.26 inches) to guarantee the
longest life possible for the grinding head holder!
holder (I).
in contact with other objects when you lay the handpiece
down. There is a risk of the shaft becoming compressed and
asymmetrical. Asymmetry in the grinding head causes damage
to the handpiece!
or Promed. (www.promed.de).