Information On The Unit - ProMed pedisenso duo Manual

I
NFORMATION ON THE UNIT
DE
Before operating the unit for the first time, please check that all
contents have been delivered and that the line voltage is correct.
EN
The supplied power adapter (A) is an electronic power supply
unit intended for an operating voltage of 100 V~ to 240 V~.
FR
Should you require a different plug type for the operation of the
device, you can purchase it from Promed. To change the plug
IT
type, press the release (B) and pull the power plug (C) from the
power supply unit (A). Take the required power plug (C) and
ES
push it back into the power supply unit (A).
NL
• The Promed pedisenso duo unit uses a high performance
motor. The electronic speed control is used to smoothly set the
RU
speed of the grinding head.
• The collect chuck adapter accept all conventional abrasives
PL
with shaft in standardised dental measurements of 2.332 mm
to 2.350 mm. To ensure a long life span of the collet chuck
SE
adapter, please use only quality abrasives with rounded shaft
closure and a maximum shaft length of 36 mm!
FI
/
ACCESSORIES
• Always make sure that the grinding head does not come
• Grinding head bits are available at your local specialist retailer
• To ensure hygienic operation, the grinding heads must be
• The handpiece may only be disinfected using disinfectant wipes.
in contact with other objects when you lay the handpiece
down. There is a risk of the shaft becoming compressed and
asymmetrical. Asymmetry in the grinding head causes damage
to the handpiece!
or Promed. (www.promed.de).
disinfected after use.