Kenwood TS-850S Instruction Manual page 45

No. Programmable functions Initial state
Select the Manual weight
23 (When Auto weight function is 3.0
OFF.)
Bug key: ON(Used)/OFF(Not
24
used)
OFF
(When the ELECTRONIC KEY
switch is ON.)
When split is selected, the
25
temporary display of the transmit
ON
frequency can be turned on and
off.
26
Display for the 50 MHz
OFF
converter: ON/OFF
27
Display for the 144 MHz
OFF
converter : ON/OFF
28
Display for the 430 MHz
OFF
converter: ON/OFF
Change the REC 1 recording
29 time to 8 or 16 seconds. (When 8 seconds
optional DRU-2 is installed)
Change the REC 2 recording
30 time to 8 or 16 seconds. (When 8seconds
optional DRU-2 is installed)
Change the REC 3 recording
31
time to 16 or 32 seconds. 16
(When optional DRU-2 is seconds
installed)
32
Transfer function when two TS-
OFF
850 are connected: ON/OFF
Turn on and off direct writing
33
into VFO by the transfer function
OFF
when two TS-850 are
connected.
The IF and AF circuits of this
transceiver can be switched off
34 (mute mode) so the transceiver OFF
will not transmit even if the
standby terminal is grounded.
Transfer function when two Ts-
35 850 are connected (SPun :
OFF
ON/OFF
Notes
1. When menu number 26, 27, or 28 is turned on,
the other two menu numbers are not displayed.
2. Menu number 34 can mute the IF and AF
circuits only, not the RF circuit. So if excessive
power is applied to the ANT connector during
muting, the RF circuit may be damaged. Do not
apply excessive power directly to the muted
side of the transceiver.
36