Motorola DROID Manual page 157

132
CHAPTER 5: Wi-Fi and 3G Connectivity
Use the 3G
Mobile
Hotspot app.
You can see
all connected
devices.
Figure 5–3. Creating a Wi-Fi hotspot.
Follow these steps to connect to a mobile hotspot:
1. Launch the 3G Mobile Hotspot app.
2. Tap the checkbox to start Mobile Hotspot service.
3. The first time you launch the app, you'll be prompted to set up your AP Settings.
AP stands for access point.
4. Give your mobile network a name (SSID) or leave the default setting.
5. Choose a security method; WPA2 is preferred.
6. Choose a password.
7. Save your settings.
8. Connect to your network from your laptop, iPad, or other Wi-Fi device just as if it
were another Wi-Fi access point.
Tap
Tap to turn on
the 3G Mobile
Hotspot and
configure it for
the first time.
Connect to
your DROID
just like any
other
network.
Mobile
Hotspot is
on.
AP stands for
Access
Point.
The SSID-
Service Set
Identifier is
the name of
your hotspot.
Choose a
type of
security.
WPA2 is the
default.
Check this
box to see
your
password as
you type.
Choose a
password.