Before the installation
•
Open the microwave door and take out all the accessories and
remove the packing material.
•
Make sure that the microwave is not damaged by any way.
Check that the oven door closes correctly and the inside of the
door and front oven panel are not damaged.
Caution!
•
DO NOT USE THE OVEN
•
During installation, make sure that the power cable
does not come into contact with any moisture or
objects with sharp edges and the back of the oven.
High temperature can damage the cable.
•
Warning: after the oven is installed you should
make sure you can access the plug.
Positioning the microwave oven
•
If you fit the microwave oven into a housing unit, the material
of the housing unit should be insulated, and the clearance
between the edge of the housing and the microwave oven
should be over 100mm for ventilation.
Only a qualified person in compliance with the instructions
provided must install the appliance. The manufacturer declines all
responsibility for improper installation, which may harm persons
and animals and damage property.
Caution
The power supply to the appliance must be cut off before
any adjustments or maintenance work is done on it.
MGO45CL-C&L-A5-GB-IM-07.indd 37
Installation
01
37
11/4/13 2:45 PM