Fitting; Build-In The Oven - ElcoBrandt 2004 solo Manual

STEAM OVEN 2004 SOLO MODEL
Technical training
2 -

FITTING

2.1. - Build-in the oven

The oven has a high-performance air flow system which gives remarkable results as long as the
following points are applied:
•
The oven may be fitted either underneath a work top or in a suitable sized column unit.
•
Cut a hole measuring 50 mm x 50 mm in the back wall of the insert space for the electric cable to
cross through (see diagram below).
•
Centre the oven in the unit, and make that it is at least 2 mm from any other unit beside it.
•
The oven must be disconnected from the power supply while it is being installed in the unit
•
For greater stability, fix the oven in the unit with 2 screws in the holes on the side uprights.
560
550
50
380
378
405
CU5-VAP2004-001UK-03/05
544
595
INSTALLATION
20
386,5
- 5 -