Coldtub Coldtub Pal Version 1 R1 Maintenance Schedule - COLDTUB Icekube Owner's Manual

68
3.13 COLDTUB Pal Version 1 R1
Maintenance Schedule
The following table outlines the typical water maintenance program required for an COLDTUB
fitted with COLDTUB Pal Version 1 R1.
To help ensure chemicals dissolve appropriately it is good practice to first mix/dissolve the
chemical in an uncontaminated container of hot water before carefully adding to the Tub water.
There are two methods to check the target range:
• COLDTUB Pal Application, if your Tub has Wi-Fi and access to the internet through
your home network or portable device such as iPad or smart phone, you can log onto
COLDTUB Pal and open the Settings or Diagnostics Page to review the readings (To
access COLDTUB Pal you must first register your details on the COLDTUB Pal web site:
www.mycoldtub.com.
Item
pH
ORP
Sodium
Chloride
Filter
Water
Winning is cool™
Frequency Maintenance Task
Weekly Check the Potential Hydrogen (pH) to
ensure it is in the target range.
Always first check to ensure the pH is
within the target range. If the pH is out
of the target range pH must be adjusted
before making any adjustments to chlo-
rine levels
Weekly Check the Free Chlorine Level to ensure
it is in the
(& before
target range.
each use)
Monthly Check the Sodium Chloride Level to
ensure it is in the target range.
3 Monthly Change the filter(s)
6 Monthly Change the water
Target Range
7.2 – 7.6 pH
545–550 mV
Version 1 R1
1500 – 1800
ppm
N/A
N/A