Table of Contents
Advertisement
30
2.9 COLDTUB App QRC Through WIFI
How to Connect Your Tub To Your Network With WIFI Extender
Extender Flowchart
The following Supportive Video Link may
also assist you with this process:
The following flowchart shows how to connect COLDTUB App
http://www.ColdTub.com/support/how-to-videos/
through WIFI Extender.
how-to-connect-with-a-tenda-wifi -extender/
The following Supportive Video Link may
also assist you with this process:
http://www.ColdTub.com/support/how-to-videos/
how-to-connect-with-a-tenda-wifi -extender/
NO
Try another
WIFI Extender
• Scroll through the LLP settings by
pressing the FILTER button, each
time you press the fi lter button you
Try another
move to the next LLP setting, scroll
WIFI Extender
through until IP is displayed.
•St or dy will be displayed, if St
is displayed press the Up Arrow
• Scroll through the LLP settings by
button to change to dy Dynamic.
pressing the FILTER button, each
• Press the FILTER button again to
time you press the fi lter button you
display the Tubs IP address (Last
move to the next LLP setting, scroll
Octec should appear).
through until IP is displayed.
• Continue to press the FILTER
•St or dy will be displayed, if St
button until you have exited the
is displayed press the Up Arrow
LLP settings. At this time the Pack
button to change to dy Dynamic.
will save the settings.
• Press the FILTER button again to
display the Tubs IP address (Last
Check home router fi rewall settings for
Octec should appear).
restrictions. The router may be set to
Block devices "scanning" the network.
• Continue to press the FILTER
button until you have exited the
LLP settings. At this time the Pack
NO
YES
will save the settings.
Blocked?
Check home router fi rewall settings for
restrictions. The router may be set to
Block devices "scanning" the network.
Try connecting
Unblock router
to the Tub with
settings.
NO
another device.
Connect to the Tub using the LAN
Try connecting
button on the App.
to the Tub with
Note: It can take up to 6-8 times for the
another device.
App to fi nd The Tub on your Network,
if need be keep pressing the reconnect
button.
Connect to the Tub using the LAN
button on the App.
Connected?
Note: It can take up to 6-8 times for the
NO
App to fi nd The Tub on your Network,
if need be keep pressing the reconnect
Contact your Dealer for assistance.
Winning is cool™
Quick Reference Guide
How to Connect Your Tub To Your Network With WIFI Extender
YES
Illuminated?
ensure the power cable is correctly
YES
Access the Tubs Low Level
NO
Programming (LLP) through the
Illuminated?
Topside Controller by holding
the FILTER button down until LLP
is displayed.
Programming (LLP) through the
Topside Controller by holding
the FILTER button down until LLP
Open the Arctic Tubs App on your de-
vice such as your Smart Phone or tablet.
Connect to the Tub Usingthe
LAN bbutton on the App.
YES
Note: It can take up to 6-8
Blocked?
vice such as your Smart Phone or tablet.
times for the App to fi nd the
Tub on your Network, if need be keep
pressing the reconnect button.
Unblock router
NO
settings.
Connected?
YES
YES
Your Tub is now connected to your Network
and you can control your Tub through the App.
NO
Go to the myarcticTubs.com webpage to
button.
create an account for your Tub and to register
you Tub. Refer Flowchart How to Connect
YES
Your Tub to the Myarctic Tubs Server.
Connected?
and you can control your Tub through the App.
NO
Quick Reference Guide
Remove the Tubs PAK cover, lo-
cate the WIFI Extender check and
confi rm WIFI Extender power light
is illuminated.If not illuminated
installed.
Remove the Tubs PAK cover, lo-
cate the WIFI Extender check and
Scroll through the Tubs Low
confi rm WIFI Extender power light
Level Programming (LLP) check
is illuminated.If not illuminated
to ensure the Tubs Internet
ensure the power cable is correctly
Protocol (IP) address.
installed.
Access the Tubs Low Level
is displayed.
Open the Arctic Tubs App on your de-
If WIFI light is Orange home
WIFI signal may be weak, try
the following:
• Relocate WIFI Extender.
• Relocate home router.
Connect to the Tub Usingthe
Note: If the above does not
LAN bbutton on the App.
correct the problem, contact
Note: It can take up to 6-8
your Dealer for assistance.
times for the App to fi nd the
Tub on your Network, if need be keep
pressing the reconnect button.
Connected?
YES
Your Tub is now connected to your Network
If your Tub Was ordered with a WIFI Extender the WIFI Ex-
tender will be Connected to the Motherboard & Processor
Card in the Tub Pack of your Tub and your Tubs Low Level
Programming (LLP) settings will be factory set to Dynamic.
Set up to have a Dynamic Internet Protocol (IP) address.
If your Tub Was ordered with a WIFI Extender the W
Watch the Video that demonstrates How to Connect
tender will be Connected to the Motherboard & Pro
Your Tenda Wireless Range Extender to Your Net-
Card in the Tub Pack of your Tub and your Tubs Low
work(WIFI Extender ordered with your Tub)
Programming (LLP) settings will be factory set to Dy
Set up to have a Dynamic Internet Protocol (IP) ad
Following the directions in the Video, connect the
Watch the Video that demonstrates How to C
WIFI Extender to your Network
Your Tenda Wireless Range Extender to Your
work(WIFI Extender ordered with your Tu
Using your smart phone or tablet go to Settings/WIFI.
Connect to Tenda _XXXXX (Open)
Following the directions in the Video, conne
NO
Do you see the WIFI Extender?
Using your smart phone or tablet go to Settin
YES
Doyou have an IP
address?
NO
YES
Scroll through the Tubs Low
Level Programming (LLP) check
Remove the Tubs PAK cover, locate the WIFI Extend-
to ensure the Tubs Internet
er check and confi rm:
Protocol (IP) address.
• Power light on WIFI extender is illuminated.
• Ethernet cable is plugged into the RJ45 plug on the
WIFI Extender and light is illuminated.
• Ethernet cable is plugged into the RJ45 plug on the
Processor Card and light directly under the RJ45
Remove the Tubs PAK cover, locate the WIF
plug is illuminated.
er check and confi rm:
• Power light on WIFI extender is illuminate
• Ethernet cable is plugged into the RJ45 p
WIFI Extender and light is illuminated.
• Ethernet cable is plugged into the RJ45 p
NO
Processor Card and light directly under th
Are all lights illuminated?
plug is illuminated.
Try the following one at a time
in the bellow order:
NO
• Different Ethernet cable.
• Reset the WIFI Extender by
holding down
the factory reset button for
10 seconds
If WIFI light is Orange home
with a pen.
WIFI signal may be weak, try
• New WIFI Extender.
the following:
• New Processor Card.
• Relocate WIFI Extender.
Note: If the above does not
• Relocate home router.
correct the problem, contact
Note: If the above does not
your Dealer for assistance.
correct the problem, contact
your Dealer for assistance.
WIFI Extender to your Network
Connect to Tenda _XXXXX (Open)
Do you see the WIFI Extender?
NO
YES
Doyou have an IP
address?
YES
NO
YES
YES
Are all lights illuminated?
Try the following one
in the bellow order:
• Different Ethernet ca
• Reset the WIFI Exte
holding down
the factory reset but
10 seconds
with a pen.
• New WIFI Extender
• New Processor Card
Note: If the above doe
correct the problem, c
your Dealer for assista
#17486
Advertisement
Chapters
Table of Contents
