Each pump is built using non-corrodible materials, ensuring a long service life. Because STAIRS CP series submersible utility pump is both durable and lightweight, it can be easily transported from one location or project to another.
110 x 110 x 216 CP -200 220-240 200W 1.3/1.3 1-1/4" 110 x 110 x 216 CP -200A 220-240 200W 1.3/1.3 1-1/4" •Model with “A” is AUTO. •6 Units per set - 36 Sets per pallet. www.stairs.com.tw - 2 -...
Page 4
Component CP100,CP100A CP200,CP200A Component Material Shaft SUS400 Series Motor Housing PP+GF Pump Casing PP+GF Strainer PP+GF Impeller Nylon+GF Mechanical seal Carbon+Ceramic+NBR Oil Seal Cable gland SUS304 www.stairs.com.tw - 3 -...
Page 7
Limited Warranty: Arrow on valve should point in direction of ow. Products of STAIRS are warranted to the rst user only to be free of defects in ●Discharge shut-o valve (if used) may be closed. material and workmanship for a period of 6 months from date of installation, Pump runs ●Impeller or volute openings are fully or partially clogged.
THANK YOU FOR PURCHASING A CAUTION STAIRS PRODUCT 6.Pump equipped with ● DO NOT connect to any voltage other than that listed on the Optional Float switch. Take the time to read the instructions carefully before using this nameplate When the pump senses appliance.
Need help?
Do you have a question about the CP Series and is the answer not in the manual?
Questions and answers