2.1 Applications STAIRS SP submersible pumps are designed for a wide range of water supply and liquid transfer applications, such as the supply of fresh water to private homes or waterworks, water supply to nursery gardens or farms, drawdown of groundwater and pressure boosting, and various industrial jobs.
SP Borehole Submersible Pumps 4. Electrical connection Warning Before starting work on the pump, make sure that the electricity supply has been switched off and that it cannot be accidentally switched 4.1 General The electrical connection should be carried out by an authorized electrician in accordance with local regulations. The supply voltage, rated maximum current and cos appear from the loose data plate that must be fitted close to the installation site.
Page 5
SP Borehole Submersible Pumps The bolts and nuts securing the straps to the pump must be tightened diagonally to the torques stated in the following table: NOTE CAUTION Make sure that the pump chambers are aligned when assembly has been completed. 5.2 Removal and fitting of cable guard For removal and fitting of cable guard(s), see our assembly instruction.
Long time operation with water containing air may damage the pump and cause insufficient cooling of the motor. 7. Maintenance and service The pumps are maintenance-free. All pumps are easy to service. Service kits and service tools are available from Stairs.
Need help?
Do you have a question about the SP Series and is the answer not in the manual?
Questions and answers