Johnson Controls CD-W00-N0-2 Installation Instructions Manual

CD-W00-x0-2 Series Wall Mount CO
Transmitters
Installation Instructions
CD-W00-00-2, CD-W00-N0-2
North American Emissions Compliance
United States
This equipment has been tested and found to comply with
the limits for a Class A digital device pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
this equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area may cause harmful
interference, in which case users will be required to
correct the interference at their own expense.
Canada
This Class (A) digital apparatus meets all the
requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes
les exigences du Règlement sur le matériel brouilleur du
Canada.
CD-W00-x0-2 Series Wall Mount CO
2
Refer to the QuickLIT website
Installation
IMPORTANT: The CD-W00-x0-2 Series Wall Mount CO
and Temperature
an input to equipment under normal operating conditions.
Where failure or malfunction of the transmitter could lead
to personal injury or property damage to the controlled
equipment or other property, additional precautions must
be designed into the control system. Incorporate and
maintain other devices, such as supervisory or alarm
systems or safety or limit controls, intended to warn of or
protect against failure or malfunction of the transmitter.
IMPORTANT : Le CD-W00-x0-2 Series Wall Mount CO
and Temperature
des données entrantes à un équipement dans des
conditions normales de fonctionnement. Lorsqu'une
défaillance ou un dysfonctionnement du CD-W00-x0-2
Series Wall Mount CO
des blessures ou d'endommager l'équipement contrôlé ou
un autre équipement, la conception du système de
contrôle doit intégrer des dispositifs de protection
supplémentaires. Veiller dans ce cas à intégrer de façon
permanente d'autres dispositifs, tels que des systèmes de
supervision ou d'alarme, ou des dispositifs de sécurité ou
de limitation, ayant une fonction d'avertissement ou de
protection en cas de défaillance ou de dysfonctionnement
du CD-W00-x0-2 Series Wall Mount CO
Temperature
CAUTION: Risk of Electric Shock.
! Disconnect the power supply before making
electrical connections to avoid electric shock.
MISE EN GARDE : Risque de décharge
électrique.
Débrancher l'alimentation avant de réaliser tout
raccordement électrique afin d'éviter tout risque
de décharge électrique.
and Temperature Transmitters
2
Installation Instructions
1
2 4 - 1 0 8 6 4 - 1 1 , R e v . B
and Temperature
Part No. 24-10864-11, Rev. B
Issued March 2016
for the most up-to-date version of this document.
Transmitters are intended to provide
Transmitters est destiné à transmettre
Transmitters risque de provoquer
2
Transmitters.
2
2
and
2