Extreme Networks ExtremeControl IA-A-305 Installation Manual page 18

Configuring the Engine
==========================================================
======
Do you want to use NTP (y/n) [y]? y
Please enter a NTP Server IP Address (Required): 144.131.10.120
Would you like to add another server (y/n) [n]? y
Please enter a NTP Server IP Address (Required): 144.131.10.121
Would you like to add another server (y/n) [n]? n
7. In the NTP validate selection screen, enter 0 to accept the current settings and
proceed to the Set Time Zone screen at step 10.
==========================================================
======
NTP Servers
==========================================================
======
These are the currently specified NTP servers. Enter 0 or any key
other than a valid selection to complete NTP configuration and
continue.
If you need to make a change, enter the appropriate number from the
choices listed below.
144.131.10.120
144.131.10.121
0. Accept the current settings
1. Restart NTP server selection
2. Set date and time manually
==========================================================
======
Enter selection [0]: 0
8. If you answered no to using an NTP server to set date and time, set the date and time
in the Set Date and Time screen.
==========================================================
======
Set Date And Time
==========================================================
======
The current system date and time is: Thu Apr 24 09:34:08 2008
Please enter the values for date and time as directed where input is
expected in the following format:
MM - 2 digit month of year
18 of 31