SMC Networks Elite16 Manual page 47

< Escape> Cancel <F1> = Help <Alt><Fia> = Exit
Select the driver that Matches the netuork board in your uorkstation.
AMdJ aJieullsMuosklskcMBi v.XX.XX (XXXXX)
BMdk uinhgslceeodkskncd vX.XXXX (XXXXXX)
Gijnospirun esxxl call inebberte vZ.&B (XXXXXX)
HLL spcirn BicleMandd vl.15 (XXXXXX)
lUE thsliginge vZ.&B (XXXXXX)
Jeurdde MN67 vZ.BZEC (XXXXXX)
Neurdle liMliM V3.BZEC (XXXXXX)
Psodks keisghdks lieldlsl Idis V.3.53XX (XXXXXX)
Rsidls disldkoskd isldisldislcl v.7.XXX (XXXXXX)
Highlight the correct driver: then press <EntBr>.
If the driver you uant is not listed, press <Insert>
Figure 12. Updated Configuration List
The program displays a screen indicat-
' ing the choice you've just made
and prompts you to reconfirm this
choice.
10. Select YES, GENERATE.
11. Insert the WSGEN diskette again
when prompted and press [Enter].
The program creates a NetWare shell
for your DOS workstation.
12. When prompted, insert the
LAN_DRV_200 diskette again and
strike any key
If successful, a message appears stat-
ing that the installation is com-
plete. You are returned to the DOS
prompt.
Continue the installation by loading
NetWare 286 V2.2 on all workstations
connected to this network.
50