Specifications - Luxman SQ-N150 Owner's Manual

Specifications

Rated output
Total harmonic distortion
Input sensitivity/input impedance
S/N ratio
Frequency response
Tone control
Supplied functions
Circuit
Vacuum tube used
Accessories
Power supply
Power consumption
Max. external dimensions
Weight
* Specifications and the appearance are subject to change without notice.
10 W+10 W (6 Ω)
Less that 1 % (1 kHz, 10 W/6 Ω, LINE STRAIGHT "ON")
PHONO (MM) : 3.0 mV/47 kΩ
PHONO (MC) : 0.33 mV/100 Ω
LINE : 180 mV/47 kΩ
PHONO (MM) : 84 dB or more (IHF-A correction, 3.0 mV input)
PHONO (MC) : 64 dB or more (IHF-A correction, 0.33 mV input)
LINE : 95 dB or more (IHF-A correction, input shorted, line straight on)
PHONO (MM) : 20 Hz to 20,000 Hz (within ±0.5 dB, line straight on)
PHONO (MC) : 20 Hz to 20,000 Hz (within ±0.5 dB, line straight on)
LINE : 20 Hz to 80,000 Hz (within –3 dB, line straight on)
BASS : ±8.0 dB at 100 Hz
TREBLE : ±8.0 dB at 10 kHz
[Front panel]
• Operation switch
• Input selector
• Analog meter
• Tone control
• Headphone jack
[Rear panel]
• Input terminal
• Signal ground terminal
[Remote control function] (when using RA-25 or RD-27 (provided with D-N150))
• Sound volume (up/down)
Driver: P-K split phase inversion circuit, Output: Pentode connection
4×EL84, 2×ECC83
• Power cable
• Owner's Manual (This document)
• Safety cautions
230 V〜 (50 Hz)
98 W
297 (W) x 188 (H) x 251 (D) mm
(front side knob with 20 mm and rear side terminal with 21 mm included in depth)
12.4 kg (main unit)
VACUUM TUBE INTEGRATED AMPLIFIER SQ-N150
• Volume control
• Balance control
• Display switch
• Line straight switch
• Speaker terminals
• AC inlet
• Mute (only when using RA-25)
• Remote control RA-25
11