Operations - Luxman SQ-N150 Owner's Manual

Operations

Before operation
1. Ensure that the connections are correctly made. (Normal
playback cannot be achieved with wrong connections of
R, L, !, or @.)
2. When the power is toggled between on and off or the in-
put selector is changed over, set the volume control to the
minimum position in advance.
Playback
1. Press the operation switch to turn on the switch after en-
suring that the volume control is set to the minimum posi-
tion.
2. Select a source to be reproduced with the input selector.
3. Adjust the sound level with the volume control.
4. Operate the line straight switch, balance control, and tone
control according to your taste.
Volume can also be controlled by the accessory remote con-
trol RA-25 or RD-27 provided with D-N150, compact disc
player.
Line straight switch
The line straight switch is used to play sound with the short-
est signaling route for enhancing the purity of the source se-
lected with the input selector. When this switch is set to on,
the balance control and tone control are bypassed.
8
Balance control
The balance control allows users to adjust the balance of
sound volume between right and left channels.
When the balance adjustment is not required, the balance
control is set to the center position.
When the line straight switch is set to on, the balance control
does not function.
Tone control
This unit has the tone control function for the low-frequency
range (BASS) and for the high-frequency range (TREBLE).
By setting each control to the center position, flat frequency
characteristic is obtained. Rotating the BASS control clock-
wise makes the low-frequency range enhanced, and rotating
it counterclockwise makes the low-frequency range attenu-
ated.
In the same manner, rotating the TREBLE control clockwise
makes the high-frequency range enhanced, and rotating it
counterclockwise makes the high-frequency range attenuated.
For both the low-frequency and high-frequency ranges, the
right and left channels interlockingly function.
When the line straight switch is set to on, the tone control
does not function.