Installation Instructions; Installing Door Hinges On Opposite Side - Miele 7080 850 Operating And Installing Instructions

I 1
Installing door hinges
on opposite side
e
Unscrew pivot pin
CD.
e
Tilt the door out at the top and lift it off.
e
Take out centre bearing pin ®.
e
Tilt the lower door out at the top and lift it off.
e
Detach centre pivot bracket
CD.
To do so, press cover®
sideways and pull it out to the front. Take out the fastening
screws.
e
Turn pivot bracketeD trough 180° and attach it atthe corres-
ponding position on the opposite side of the appliance.
e
Change round the positions of hinge pin® and plug
®.
e
Attach the door at the bottom by fitting its mount over hinge
pin
®,
and close it.
e
Insert centre pivot pin®, making sure it is seated properly.
e
Attach cover® at the corresponding position on the oppo-
site side of the appliance.
e
Attach the top door and screw in pivot pin
CD.
e
Seal all exposed retaining holes with the plugs and covers
provided.
e
Remove door connecting elements ®, and attach them
again when re-installing the door.
Installation
instructions
Fig. A
-----CD
23