IPG RSA 2024-SB Operations Manual & Parts List
  1. Manuals
  2. Brands
  3. IPG Manuals
  4. Food Saver
  5. RSA 2024-SB
  6. Operations manual & parts list

IPG RSA 2024-SB Operations Manual & Parts List

Random semi-automatic case sealer
Hide thumbs
Table of Contents

Advertisement

Quick Links

RSA 2024-SB
RANDOM SEMI-AUTOMATIC CASE SEALER
Serial Numbers TM122 or TM622 XX X XXX

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RSA 2024-SB and is the answer not in the manual?

Questions and answers

Related Manuals for IPG RSA 2024-SB

Summary of Contents for IPG RSA 2024-SB

  • Page 1 RSA 2024-SB RANDOM SEMI-AUTOMATIC CASE SEALER Serial Numbers TM122 or TM622 XX X XXX...
  • Page 2 UM122TW / UM622TW UDM10012...

  • Page 3: Table Of Contents

    Section 1 Table Of Contents------------------------------------------------- 3 Section 2 Technical And Field Assistance------------------------------ 4-5 Section 3 Warranty-------------------------------------------------------------- 6 Section 4 Description Of The RSA 2024-SB Case Sealer----------- 7 Section 5 Important Safeguards-------------------------------------------- 8-15 Section 6 Specifications------------------------------------------------------- 16-21 Section 7 Set Up Procedures------------------------------------------------ 22-35...

  • Page 4: Section 2 Technical And Field Assistance

    SSISTANCE Technical Support This manual covers the Interpack Model RSA 2024-SB Random Side Belt Case Sealer. It has been set up and tested in our factory with Intertape manufactured pressure sensitive tapes. The airline and pressure conditions of the testing will differ from customer systems. The machine may require adjustments to best fit operating needs.
  • Page 5 IELD ERVICE SSISTANCE This machine is designed to provide years of trouble free operation. If any problems arise with this machine during the normal course of operation, your properly trained and qualified internal service personnel should be able to repair any issues after consulting the Trouble Shooting section of this manual.

  • Page 6: Section 3 Warranty

    ARRANTY : The following warranty is made in lieu of all other warranties, QUIPMENT WARRANTY AND LIMITED REMEDY express or implied, including, but not limited to, the implied warranty of merchantability, the implied warranty of fitness for a particular purpose, and any implied warranty arising out of a course of dealing, a custom or usage of trade: Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following warranties: ...

  • Page 7: Section 4 Description Of The Rsa 2024-Sb Case Sealer

    Intertape brand pressure sensitive case sealing tape to the top and bottom center seam of regular slotted corrugated cases. The RSA 2024-SB is auto- adjustable to a random variety of case sizes (see Case Specifications, Pg. 20)

  • Page 8: Section 5 Important Safeguards

    Important Safeguards There are a number of safety labels used on Interpack Case Sealers. These labels are placed at different locations (refer to Figure 2) on the machine to warn operators and service personnel of possible dangers. Please read the labels on the machine and the following safety precautions before using the machine.

  • Page 9: Section 5 Important Safeguards

    Important Safeguards (Located on (Both Sides) Tape Head) (Both Sides (Both Sides) If Installed) (Located on (Both Sides) Electrical Box) (Also located on Electrical Box) Figure-2 UM122TW / UM622TW UDM10012...
  • Page 10 Important Safeguards There Are A Number Of Safety Labels Used On Intertape Case Sealers. The illustrated label as shown is attached to the Knife Guard inside the upper and  lower HSD 2000-ET II Tape Head. The label warns operators and service personnel of the very sharp blade used to cut the tape at the end of the tape application.
  • Page 11 Important Safeguards The label shown is affixed to the top squeezer assembly brackets on either side of the machine if installed. The squeezer assembly is optional. They warn the operator of a potential pinch point between the top of the case and the top squeezer rollers.
  • Page 12 Important Safeguards The illustrated label shown is located on the side of the column. This label provides convenient safety instructions for the operator and service personnel in the operation of the Intertape Case Sealing Equipment. This label advises personnel about the dangers of the machine due to compressed air used in the system.
  • Page 13 Important Safeguards Explanation of Signal Word Consequences Warning: Indicates a potentially hazardous situation, which if not avoided could result in death, serious injury, or property damage. Caution: Indicates a potentially hazardous situation, which if not avoided could result in minor or moderate injury, or property damage.
  • Page 14 Important Safeguards Warning  To Reduce The Risk Associated With Mechanical And Electrical Hazards: Allow only properly trained and qualified personnel to operate and service this equipment. Operator Skill Level Descriptions Skill “A”: Machine Operator This operator is trained to use the machine with the machine controls, to feed cases into the machine, make adjustments for different case sizes, to change the tape, and to start, stop, and re-start production.
  • Page 15 Important Safeguards Operators Skill Level Required To Perform The Following Tasks On The Machine Operator Skill Number Of Operation Machine Condition Level Operators Running With Safety Protections Machine Installation & Set Up B & C Disabled Stopped By Pressing The Adjusting Case Size Emergency Stop Button Stopped By Pressing The...

  • Page 16: Section 6 Specifications

    PECIFICATIONS RSA 2024-SB Machine Dimensions Figure-3 Machine Weight: 650 lbs. (295 kg) crated UM122TW / UM622TW UDM10012...

  • Page 17: Section 6 Specifications

    PECIFICATIONS RSA 2024-SB Machine Components Tape Head See Section 7, Page 30 In This Manual For Tape Loading & Threading. Balance/Drive Base/Compression Electrical Box Guide Regulators Conveyer Height Adjustment Main Air Regulator Control Box Figure-4 UM122TW / UM622TW UDM10012...
  • Page 18 PECIFICATIONS 1. Operating Conditions Use in a dry, relatively clean environment at 40° to 105° F (5° to 40° C) with clean dry cases. Note: Machine should not be washed down or subjected to conditions causing condensation on components. 2. Power Requirements Electrical - 110 VAC, 60 HZ, 6 A Compressed Air –...
  • Page 19 PECIFICATIONS 4. Tape Specifications Use Intertape Brand Pressure Sensitive Case Sealing Tape. The machine can accommodate 2” (48mm) or 3” (72mm) wide tape, depending on tape heads supplied. A maximum tape roll diameter of 16” (406 mm) on a 3” (76 mm) diameter core can be installed on the tape head.
  • Page 20 PECIFICATIONS 5. Case Specifications Type  Regular Slotted Containers (RSC)  Other style cases may be processed, consult factory for details. Material 125 To 275 PSI Bursting Test, Single Or Double Wall B Or C Flutes. Weight 0 to 85 lbs. (0 to 38.5 kg) Size ...
  • Page 21 PECIFICATIONS “Optional” Case Size Top Tape Head Box Assembly Removed For Clarity. To run cases with sizes that fall within the parameters set in the “Optional” Case Size chart in Page 20, remove the rear bottom gap filler as shown in Figure-5. Figure-5 Case Processing Stability For optimal performance, the cases should be stable when processing through the machine.

  • Page 22: Section 7 Set Up Procedures

    Figure-6 All contents must be verified upon reception. The following items are included with each machine.  RSA 2024-SB  Operators Manual Machine  Operators Manual Tape Head  Plastic bag containing tape head spare parts. Note: After unpacking the case sealer, look for any damage that may have occurred during shipping.
  • Page 23 ROCEDURES 2. Caster Installation (If Purchased) Caster installation requires raising the machine to access the bottom of each leg. Please follow all possible safety procedures prior to and during this process. A. With a fork lift, raise the machine to allow access to the bottom of each leg. B.
  • Page 24 ROCEDURES 3. Machine Height Adjustment Machine height adjustment requires raising the machine to adjust each leg. Please follow all possible safety procedures prior to and during this process. The Case Sealer must be level when installed. Use the adjustable legs to ensure that the machine is level and firmly on the ground (no rocking).
  • Page 25 ROCEDURES 4. Installation of Interpack Brand In-Feed and Exit Roller Tables (If Purchased) Case Direction Figure-9A Figure-9C Figure-9B Figure-9A a. Install two (2) mounting studs into roller table with hardware included. Per b. Utilizing the slots on the machine base, attach roller table to machine base by locating Figure- mounting studs in slots on machine base and push down to lock in place.
  • Page 26 ROCEDURES Installation of External In-Feed and Exit Conveyors Exit Conveyor Case Direction In Feed Conveyor Figure-10 1. Customer supplied in-feed conveyor (if used) should provide straight (not curved) and level entry into the case sealer. 2. Customer supplied gravity exit conveyor (if used) should be straight (not curved) and a downward pitch of at least ¼...
  • Page 27 ROCEDURES 6. Connecting Utilities Electrical Figure-12 Figure-11 A twelve foot (12’) standard three conductor power cord with plug is provided for 110V, 60 Hz, 15 amp electrical service. The receptacle must be properly grounded. Before the machine is plugged into the receptacle, ensure that all materials are removed from the machine. The electrical control is protected with an automatic circuit breaker with resettable overload.
  • Page 28 ROCEDURES 6. Connecting Utilities, cont’d. Electrical, cont’d. Figure-14 Figure-13 The electric motors are protected with an automatic re-settable overload (Figure-13). This reset is located in the electrical box in the lower left quadrant. Push on the top blue button to reset. The current setting should be set at 110% of the FLA (Full Load Amps) of a single motor.
  • Page 29 ROCEDURES 7. Connecting Utilities, cont’d. b. Pneumatic Note: The pressure setting for the air regulators (Figure-15 & Figure-16) are factory set. These values will need to be adjusted as needed by customer supplied pressure and volume. Figure-16 Figure-15 The main air regulator (Figure-15) has a male "quick disconnect" adaptor. Connect clean dry compressed air to this adaptor.
  • Page 30 ROCEDURES 8. Removing Tape Heads Prior to Tape Loading Removing Upper Tape Head Figure-17 1. Slide Tape Head Toward The Infeed End Of Machine And Rotate Up. 2. Slide Tape Head Toward The Exit End Of Machine And Lift Out Of Rear Slot. Removing Lower Tape Head Top Tape Head Box Assembly Removed For...
  • Page 31 ROCEDURES 9. Tape Loading  The HSD 2000-ET II Tape Heads accommodate 2-inch (48mm) wide tape rolls, while the  2000-ET II /3" Tape Heads accommodate 3-inch (72mm) wide rolls. 1. Place the tape head onto a sturdy, flat surface. 2.
  • Page 32 ROCEDURES ARNING HE KNIFE CONTAINED IN THE EAD IS EXTREMELY SHARP SE CAUTION WHEN THREADING THE TAPE TO AVOID PERSONAL INJURY 10. Tape Threading Preparation Figure-20 Threading the tape in the Tape Head does not require any special tools. Pull approximately twelve (12) inches of tape from the roll and fold in half lengthwise, adhesive side to adhesive side.
  • Page 33 ROCEDURES 11. Tape Threading TAPE ROLL PEEL OFF ROLLER ADHESIVE SIDE GUIDE CLUTCH ROLLER ROLLER GUIDE ROLLER GUIDE ROLLER TAPE GUIDE SHOE Adhesive APPLICATION Clutch Roller ROLLER Side Guide Roller Knurled Guide Roller Guide Roller Figure-21 Figure-22 Figure-21 1. As Illustrated In , First Thread The Tape Tail Over The Peel Off Roller.
  • Page 34 ROCEDURES 12. Re-Installing Tape Heads Figure-23 1. Insert Exit End of Tape Head into Rear Slots. 2. Rotate Front of Tape Head Down Into Front Slots 3. Push Front of Tape Head Down to Seat in Bottom of Slot. UM122TW / UM622TW UDM10012...
  • Page 35 ROCEDURES 13. Preparation Of Case To Be Processed Figure-24 Figure-25 a. Flap Folding i. Fold Minor Flaps In As Shown In Figure-24 ii. Fold Major Flaps In As Shown In Figure-25 Figure-26 Figure-27 b. Over Fills And Void Fills. Over Fills As Shown In Figure-26 And Void Fills As Shown In Figure-27 Should Be Avoided To Assure Proper Processing Of The Corrugated Case.

  • Page 36: Section 8 Operating Instructions

    RSA 2024-SB Case Sealing machine. The RSA 2024-SB Case Sealer has three operating modes. The operator selects these modes, using the 2-position switch and push button located on the Control Box. Refer to Figure-28.
  • Page 37 PERATING NSTRUCTIONS Bottom Only Mode: This mode is used for sealing the bottom seam of a random sized cases. In this mode, the top tape head box remains in the “home” position at all times. 1. Ensure that the compressed air is plugged in and at 90 PSI. 2.
  • Page 38 2. Void/Overfilled/Fragile Cases For overfilled cases: The RSA 2024-SB comes with a box overfilled feature to compensate for overfilled boxes to seal properly. To suit your case sealing need, this feature requires adjustments (See Below). To adjust the overfilled case device locate the knob underneath the E-Stop button on the Top Tape Head Box (Refer to Figure-14 for E-Stop location).
  • Page 39 PERATING NSTRUCTIONS 2. Void and Overfilled Cases, cont’d. For void cases: For void cases reduce pressure on the Sensing Paddle (Fig.29B) by turning knob (Fig.29A) clockwise. For fragile cases: Adjust the speed of descent of the Top Tape Head Box with the use of the Flow Control Valves (refer to "Speed of Descent of Top Tape Head Box”...
  • Page 40 PERATING NSTRUCTIONS 4. Speed of Raising of Top Tape Head Box If the Top Tape Head box slams when it reaches its apex or ascends to quickly the flow controls at the top of the side cylinders need to be adjusted (Figure-31). Using a flat head screwdriver, turn clockwise to slow the ascent and counter-clockwise for a faster ascent.

  • Page 41: Section 8 Troubleshooting

    ROUBLESHOOTING The RSA 2024-SB is fabricated with high quality components that provide trouble-free operation for a long period of time. However, should a problem occur, we recommend that you consult the following table. If the problem you encounter is not discussed in this table, call Interpack Technical Support (see Page 4 of this document).

  • Page 42: Section 8 Troubleshooting

    ROUBLESHOOTING ONTINUED Trouble Possible Causes Solutions Product does not support the end Insert proper dunnage material to Case processes but panel of the case. provide support. leading end panel is crushed. Main spring tension on tape head Reduce main spring tension. too strong.
  • Page 43 ROUBLESHOOTING ONTINUED Trouble Possible Causes Solutions Tape roll mandrel not center. Center tape roll mandrel, see Tape Head manual. Tape not centered on case. Tape roll not fully pushed on tape Push tape roll completely onto mandrel. tape mandrel. Dull blade. Replace blade.

  • Page 44: Section 9 Recommended Spare Parts List

    ECOMMENDED PARE ARTS This machine is designed to provide years of trouble free operation. However, maintaining a small inventory of spare parts assures minimum downtime in the event of a problem. We recommend that you stock the following spare parts. Part Description Item Number Recommended...
  • Page 45 REVENTATIVE AINTENANCE The RSA 2024-SB has been designed and manufactured with the finest components to provide long, trouble free performance. General preventive maintenance will improve performance and prolong the life of the case sealer Please review the illustrations and chart below for information regarding machine And Tape...
  • Page 46 REVENTIVE AINTENANCE Tape Head Preventative Maintenance Chart Frequency Item Action Required Material Weekly Monthly Quarterly Blade Guard Oiler Pad Lubricate Lightweight oil Hardware Re‐tighten any loose hardware Replace any missing hardware Cutter Blade Inspect for wear Clean Solvent Cleaner Mandrel Assembly Disassemble & Observe Mandrel Spring Check for weakness None Mandrel Friction Washer Clean Solvent Cleaner Mandrel Metal Washer None None Mandrel Shaft Remove any dust and adhesive build up Solvent Cleaner Mandrel Bearing Check for wear None Peel Roller Delrin Roller Check for free spinning. Disassemble ...

  • Page 47: Section 10 Preventive Maintenance

    REVENTIVE AINTENANCE Changing air regulator filter Warning! Ensure that the case sealer has been disconnected from the power source airline before conducting maintenance procedures. The filter on the air regulator removes dirt and moisture from air plant before it enters the carton sealer.
  • Page 48 REVENTIVE AINTENANCE Cleaning The Machine Column Shaft Side Belt Drive Base Connecting Chain Figure-33 Warning! Please Exercise All Safety Precautions Prior To Starting This Procedure. Disconnect Electrical Power And Wear Approved Safety Glasses a. Side Belt Drive Base Insert An Air Nozzle Along The Top Edge Of The Belt Into The Opening Of The Drive Base And Clean Out Any Dust And Dirt b.
  • Page 49 REVENTIVE AINTENANCE Lubricating the Machine Column Shaft Centering Chain Drive Base Shaft Figure-34 a. Column Shaft. Lubricate Both Shafts With Silicone Lubricant. b. Drive Base Shafts. Lubricate Both Shafts With Silicone Lubricant. c. Centering Chain. Lubricate Chain With Chain Lubricant. UM122TW / UM622TW UDM10012...

  • Page 50: Section 11 Machine Maintenance & Adjustment

    & A ACHINE AINTENANCE DJUSTMENT Drive Belt Replacement Using a 4mm Allen key, remove screws (2) and remove drive base cover. Rotate off the worn belt from the idler pulley. Wrap the new belt around the top of the idler pulley.
  • Page 51 After placing new belts on pulleys and turning machine on, if the belts do not track on center, contact maintenance or your IPG Distributor. Using a 4mm Allen key, replace drive base cover as shown.
  • Page 52 Intertape side belt drive idler pulleys are engineered to self-track to center. After tensioning, if the belts do not track on center, contact maintenance or your IPG Distributor. Using a 4mm Allen key, replace drive base cover as shown. UM122TW / UM622TW...

  • Page 53: Section 12 Optional Equipment

    PTIONAL QUIPMENT Compression Guides 3” Tape Head 2” Tape Head Exit Table In Feed Table Castors UM122TW / UM622TW UDM10012...

  • Page 54: Section 13 Schematic Diagrams

    LECTRICAL CHEMATIC IAGRAM UM122TW / UM622TW UDM10012...
  • Page 55 LECTRICAL CHEMATIC IAGRAM , C ’ UM122TW / UM622TW UDM10012...
  • Page 56 LECTRICAL CHEMATIC IAGRAM , C ’ UM122TW / UM622TW UDM10012...
  • Page 57 LECTRICAL ABINET 4pin 24Vdc idec relay RJ1S-CL UPM7211 it 1 UPM4459 (Motor Starter RE) UPM7211 it 2 (MAIN RE 1) UPM7524 UPM3833 UPM4466 (Motor Starter) (Koyo PLC) (Fuse Block) UPM4458 UPM4505 (Power (Motor Overload) UM122TW / UM622TW UDM10012...
  • Page 58 NEUMATIC CHEMATIC IAGRAM UM122TW / UM622TW UDM10012...
  • Page 59 ADDER OGIC UM122TW / UM622TW UDM10012...
  • Page 60 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 61 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 62 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 63 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 64 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 65 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 66 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 67 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...
  • Page 68 ADDER OGIC , C ’ UM122TW / UM622TW UDM10012...

  • Page 69: Section 11 Appendix A-Illustrations And Parts Lists

    APPENDIX A – PARTS LISTS – UM122T/UM622T...
  • Page 70 UM122T/UM622T...
  • Page 71 UM122T/UM622T...
  • Page 72 USM7563 5 8 20 18 21 22...
  • Page 73 USM7563 ITEM NO. PART NUMBER DESCRIPTION QTY. UAM0298 BASE SUB-ASS'Y USM1212 CENTRING MECHANISM UAM0275 LEG ASSEMBLY METRIC UAM0322 STOP START SWITCH ASS'Y UPM3416 LIMIT SWITCH USM8090 STOP GATE UAM0318 INLET COVER ASSEMBLY UPM0196 STRAIN RELIEF USM0808 ELECTRIC ASSEMBLY UPM0202 STR.RE3LIEF, NON-MET.LIQUIDTIGHT UPM3579 DECAL COMPR.
  • Page 74 UAM0298...
  • Page 75 UAM0298 ITEM PART # DESCRIPTION QTY. UPM3287EV OUTSIDE FRAME 2024 SB UPM2522EV TRANSVERSE BRACING UPM3228 REAR GAP FILLER UPM3234EV OUTLET ROLLER BLOCK UPM3233EV OUTLET COVER UPM0609EV SLIDING PAD L.H. UPM0606EV SLIDING PAD R.H. UPM3815 T.H. INSERT 2" UF3391 SS NYLON LOCK NUT M6-1.0 UF4114 SELF TAPPING SCREW M5 X 16mm UF 3713...
  • Page 76 USM1212 14 17 14 13...
  • Page 77 ITEM PART # DESCRIPTION QTY. UAM0301 DRIVE SUPPORT REAR SIDE RSA USM1212 UAM0302 DRIVE SUPPORT FRONT SIDE RSA UPM3251 SHAFT 20mm UPM3250 SHAFT ANCHOR PLATE UF0867 LW M8 UF0866 HNR M8-1.25 UPM3330 COLLAR 20mm UPM3401 SPRING FOR 20mm SHAFT, LC 112 M0 UF1824 FW ZINC 20mm UAM0312...
  • Page 78 UAM0312/UAM0300...
  • Page 79 UAM0312/UAM0300 ITEM PART # DESCRIPTION UAM0299/QTY. UAM0300/QTY. UAM0312/QTY. UPM3275EV SPROCKET SHAFT BEARING HOUSING L.H. UPM3263EV SPROCKET SHAFT UPM0028 SPROCKET 35B20 1/2 KW 3/16 X 3/32 UPM1637 BEARING R8-2RS UPM1646 SPROCKET SPACER (LONG) UPM0150 SPROCKET SHAFT WASHER UF5404 FHCS M5 - 0.8 x 16 mm UF2210EV SQUARE KEY ROUND ENDS 5 X 5 X 20 UPM3264...
  • Page 80 UAM0301/UAM0302...
  • Page 81 UAM0301/UAM0302 ITEM PART # DESCRIPTION UAM0301/QTY. UAM0302/QTY. UPM3243EV CASTING FOR DRIVE SUPPORT RSA LH UPM3237EV ANCHOR PLATE REAR SIDE UPM3244EV ANCHOR PLATE FRONT SIDE UPM3266EV SPLIT COLLAR FOR DRV SUPT RSA UPM3242EV DRIVE SUPPORT SPACER UPM3303 LINEAR BEARING 20mm UF5402 FHCS M6 - 1 x 20 UF6363 LW M6...
  • Page 82 UAM0275...
  • Page 83 UAM0275 ITEM PART # DESCRIPTION QTY. UPM7640 LEG WELDMENT UPM7641 LEG ADJ USTMENT UPM7642 LEG FRICTION PLATE UF4230 L.W. ZINC M12 UF6393 HHCS M12-1.75 x 35 UF3680 FW M10 UF6371 L.W. M10 UF6314 HNR M10 x 1.5 UF4229 CARRIAGE BOLT M10-1.5 x 20 UF4231 FW M12...
  • Page 84 UAM0318...
  • Page 85 UAM0318 ITEM NO. PART NUMBER DESCRIPTION QTY. UPM3231EV INLET COVER WELDMENT UPM3248EV SENSOR SUPPORT UPM0317 PHOTOELECTRIC SENSOR UF7007 SS HEX NUT M5-0.8 UF6340 SS FW M5 UF7021 SS LW M5 UF3638 SS HNR M6-1.0 UF3745 SS CARRIAGE BOLT M6-1 x 12mm UF6341 SS FW M6 UF6411...
  • Page 86 USM8090...
  • Page 87 USM8090 QTY. ITEM NO. PART NUMBER DESCRIPTION UPM3804 GPC GUIDE CYLINDER 32mm X 50mm UPM7513 GATE FOR BOSCH GUIDED CYL UPM7511 CYLINDER MNT PLT UF0867 LW M8 UF6313 HHCS M6-1.0 X 12mm UF1828 REG F.W. M6 UF3642 HHCS M8-1.25 X 35mm UF6363 LW M6 UF1190...
  • Page 88 USM6114 22 23...
  • Page 89 ITEM PART # DESCRIPTION QTY. UPM3755 FILTER REG. MOUNTING BRKT. UPM3267 FILTER REGULATOR NL2-FRE G3/8 USM6114 UPM0436 FTG Q.D. 3/8 NPT MALE UPM3175 ELBOW BRSS NKL PLT G3/8M x G3/8F UPM3179 ELBOW 3/8 MALE x 8mm TUBE UF1755 L.W. ZINC #8 UF2025 RH PH 8-32 X 3 UPM3124...
  • Page 90 UAM0322...
  • Page 91 UAM0322 ITEM PART # DESCRIPTION UPM1504EV ELECTRIC SWITCH BOX UPM4516 MUSHROOM BOTTOM SWITCH UPM4517 SELECTOR SWITCH UF7008 SS BHCS M4-07 x 6mm UPM0197EV STR.RELF METL.LIQDTGHT M20X1.5 (8-10mm) UPM0341EV LOCKNUT M20 X 1.5(FOR STRAIN RELF) UPM4518 LEGEND PLATE "AUTO BOTT" UPM6076 ANTI ROTATION WASHER UPM4816 E-STOP BUTTON...
  • Page 92 DRIVE SECTION MOTORS USM0808...
  • Page 93 USM0808 ITEM PART # DESCRIPTION QTY. UAM0295 ELECTRIC CONTROL BOX UA262024SB TW UPM0209 POWER CORD, 14/3 UPM9719 CAPACITOR 16uF UPM0197EV STR.RELF METL.LIQDTGHT M20X1.5 (8-10mm) UPM0341EV LOCKNUT M20 X 1.5(FOR STRAIN RELF) UF4231 FW M12 UF4230 L.W. ZINC M12 UF3062 HHCS M12-1.75 x 25 UF4234 HNR M12 x 1.75 UPM0225...
  • Page 94 UAM0295...
  • Page 95 UAM0295 ITEM PART # DESCRIPTION QTY. UPM3418EV BOX ELECT. 400mm X 305mm X 150mm UPM4465 CAM LOCK UPM4458 POWER SUPPLY IDEC 1.3 A UPM0407 DIN RAIL UPM7440 TB END ANCHOR FOR DN SER UPM3833 PLC KOYO 8IN VDC 6 OUT RELAY UPM4505 MOTOR O/L TELEMEC 7-10A UPM7524...
  • Page 96 USM1208 12 14 17 18...
  • Page 97 USM1208 ITEM PART # DESCRIPTION QTY. UPM9713 COLUMN 24 RIGHT METRIC UPM0738EV COLUMN SHAFT UPM0735EV COLUMN BLOCK RIGHT SIDE UPM2182EV COLUMN CAP RIGHT SIDE UPM1912 COLLAR 25mm UPM0054 SPRING 1-17/64 OD X 1-5/8 LG X .148 UF3282 SS FHCS M5-0.8 x 12 mm UF3680 FW M10 UF6371...
  • Page 98 USM1210 9 10...
  • Page 99 USM1210 ITEM PART # DESCRIPTION QTY. UPM9712 COLUMN 24 LEFT METRIC UPM0738EV COLUMN SHAFT UPM0737EV COLUMN BLOCK LEFT SIDE LM 25UU LINEAR BEARING 25 mm UPM0741EV COLUMN CAP LEFT SIDE UPM1912 COLLAR 25mm UPM0054 SPRING 1-17/64 OD X 1-5/8 LG X .148 UF3282 SS FHCS M5-0.8 x 12 mm UF3680...
  • Page 100 USM0811 22 23 11 18 28 21...
  • Page 101 ITEM PART # DESCRIPTION QTY. USM0811 UPM3282EV DRIVE SECTION, RIGHT SIDE UPM3280EV DRIVE BASE COVER RIGHT SIDE UPM0663 BELT ENDLESS 50 mm x 2120 mm UPM0129EV DRIVE PULLEY 50mm SEE TABLE IDLER PULLEY UPM1879EV TENSIONNER SLIDE UPM1233EV IDLER PULLEY SHAFT 50mm UPM0112 SPRING LOCATOR PIN UPM0101EV...
  • Page 102 USM0812 10 11 4 19 28 27...
  • Page 103 ITEM PART # DESCRIPTION QTY. USM0812 UPM3283EV DRIVE BASE LEFT SIDE UPM3281EV DRIVE BASE COVER LH UPM7116 MOTOR T 1/3HP 21.4 : 1 UPM0129EV DRIVE PULLEY 50mm UPM0029 STRIP UHMW 2" X .03"THK UPM0663 BELT ENDLESS 50 mm x 2120 mm UPM1879EV TENSIONNER SLIDE UPM1233EV...
  • Page 104 UAM0305...
  • Page 105 UAM0305 ITEM PART # DESCRIPTION QTY. UPM0165 CYLINDER VERTICAL ANGLE L.H. UPM3170EV VERTICAL EYE BRACKET 12mm UPM2901 REAR CLEVIS, 40mmCYL. UPM2903 PIVOT PIN-SNAP RING UPM3297 CYLINDER ISO BORE 40 x 560 UPM3109 SILENCER G 1/4 M UPM3075 FLEXIBLE COUPLING M12 UPM3435EV CYL.
  • Page 106 UAM0306...
  • Page 107 UAM0306 ITEM PART # DESCRIPTION QTY. UPM0152 CYLINDER VERTICAL ANGLE R.H. UPM3170EV VERTICAL EYE BRACKET 12mm UPM2901 REAR CLEVIS, 40mmCYL. UPM2903 PIVOT PIN-SNAP RING UPM3297 CYLINDER ISO BORE 40 x 560 UPM3109 SILENCER G 1/4 M UPM3075 FLEXIBLE COUPLING M12 UPM3435EV CYL.
  • Page 108 USM0816...
  • Page 109 USM0816 ITEM PART # DESCRIPTION QTY. UAM0319 BRIDGE UM122 UAM0320 TOP TAPE HEAD FRAME UPM3305EV VERTICAL LINK PLATE UPM3321EV VERTICAL LINK PLATE LH UAM0296 PIVOT ASS'Y LEFT UAM0297 PIVOT ASS'Y RIGHT UPM1042 EXTENSION SPRING UF6371 L.W. M10 UF6384 BHCS M10-1.5 x 40...
  • Page 110 UAM0319...
  • Page 111 ITEM PART # DESCRIPTION QTY. UAM0319 UPM2521EV BRIDGE WELDMENT 2024 SB UPM3360EV HEX SPACER BAR UPM3245EV COVER SUPPORT UPM6066 ELECTRICAL SWITCH COVER UM122 UPM3292 REAR COVER GUARDING UPM0196EV STRAIN RELIEF UPM6058 STRAIN RELIEF UPM1937EV ELECTRICAL BOX UPM0419 LEGEND PLATE "EMERG.STOP" UPM3892 EMERGENCY BUTTON UPM2196...
  • Page 112 UAM0320 28 29...
  • Page 113 ITEM PART # DESCRIPTION QTY. UAM0320 UPM6059 T.H. BOX WELDMENT UM122 UPM9655 TOP FILLER ET Metric UPM0029 STRIP, UHMW, 2" W X .03" THK UPM1068 COMP.SPRING SWIVEL T.H. ASSY UPM7541 SPRING SUPPORT M4 UPM3246 ET T.H. TOP GAP FILLER UPM6067 UAM0321 SWITCH PLATE ASS'Y UPM6064...
  • Page 114 UAM0321...
  • Page 115 UAM0321...
  • Page 116 UAM0296/UAM0297...
  • Page 117 UAM0296/UAM0297 ITEM PART # DESCRIPTION UAM0297/QTY. UAM0296/QTY. UPM1130EV PIVOT PLATE REAR UPM9075 BEARING PERMAGLIDE 12 X 14 X 10 UPM0968EV PIVOT SHAFT LONG T.H. BOX 222 UF6300 RETAINING RING FOR 12mm SHAFT UF1241EV BHCS M6-1 x 20 UF1192 FHCS M6-1 x 16 mm UPM1158 PIVOT SHAFT SPACER UF1940...

This manual is also suitable for:

Interpack tm122 seriesInterpack tm622 seriesInterpack rsa 2024-sb

Table of Contents