Restore Factory Settings - HomeMatic HmIP-SWSD Mounting Instruction And Operating Manual

8

Restore factory settings

The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the smoke alarm, please
proceed as follows:
• Turn the smoke alarm in an anticlockwise direc-
tion and press the release lever to pull it from the
ceiling bracket (see figure 6).
Press the operating button (D) and turn the
•
smoke alarm into the ceiling bracket at the same
time. Press and hold down the button until the
status LED starts flashing orange.
• Now release the operating button (D).
Press and hold down the operating button (D)
•
again for 4s, until the device LED (C) lights up
green.
• Release the operating button (D) to finish the re-
set procedure.
The device will perform a restart and activates the teach-
in procedure.
Restore factory settings
59