Function And Device Overview - HomeMatic HmIP-SWSD Mounting Instruction And Operating Manual

within the scope of intended use and shall invali-
date any warranty or liability. This also applies to
any conversion or modification work. The device is
intended for private use only.
The device may only be operated within residen-
tial buildings.
3

Function and device overview

The Homematic IP Smoke Alarm monitors a room for
smoke emissions. Operation of the device is based on the
photoelectric scattered light principle. This enables a fire
to be detected at an early stage and a warning to be given
in good time that dangerous smoke gases are present.
When an alarm has been triggered, the integrated siren
sounds and the warning LED will start to flash red. A white
LED acts as emergency lighting for easy orientation also
in the event of power failure.
The integrated LED only serves as emergency
light and is not to be used as room lighting.
Function and device overview
41