Back Panel; Side Panel - Cisco RV160 Quick Start Manual

Back Panel

RESET — The RESET button has two functions:
• To reboot the unit and retain the current configuration, press and hold
RESET for a least 3 but no more than 10 seconds, by using a paper clip
or a pen tip.
• To reboot the unit and restore the factory default configuration, press
and hold the RESET button for more than 10 seconds. Changes you
have made to the router are lost.
Console Port — The router console port is designed for a serial cable connection
to a terminal or a computer that is running a terminal emulation program.
LAN — (1 - 4) RJ-45 device connections to link local area network devices,
such as PCs, print servers, or switches to the router.
WAN — Connecting the router to a wide area network device such as a
cable or DSL modem.
SFP Port — A small factor-form pluggable (SFP) is a hot-swappable input/output
device that plugs into the SFP port, linking the port with the network.
POWER — Toggles power to the device on or off.
12VDC (1.5A) — Power port that connects the device to the provided
12VDC, 1.5 amp power adapter.

Side Panel

USB — Type A USB port that supports flash drives. Caution: Use only the
power supply provided with the device; using another power supply may
cause the USB dongle to fail.
Cisco RV160 Router Quick Start Guide 5