Table of Contents
Advertisement
Main Menu
Lights
Headlight Aiming
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk, readjustment may be required.
Adjustments should be done by your
dealer or another qualified
technician.
Low Beam Headlight Bulb
Replacement
The low beam headlight bulbs are a
type of high voltage discharge tube.
High voltage can remain in the
circuit even with the light switch off
and the key removed (or the vehicle
is in VEHICLE OFF (LOCK) mode
on models with keyless access
system). Because of this, you should
not attempt to examine or change a
low beam headlight bulb yourself. If
a low beam headlight bulb fails, take
the vehicle to your dealer to have it
replaced.
556
Table Of Contents
Replacing a High Beam
Headlight/Daytime Running
Light Bulb
Your vehicle has halogen high beam
headlight bulbs which are also used
for the daytime running light.
Handle it by its base and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
1.
Open the hood.
2.
Remove all engine compartment
covers (see page
546
).
2009 TL
HOLDING CLIP
If you are replacing the bulb on
the driver's side, remove the three
holding clips with a flat-tipped
screwdriver. Then remove the
upper part of the air intake duct by
pulling it straight up.
Advertisement
Chapters
Table of Contents
