Table of Contents
Advertisement
Main Menu
Multi-Information Display
Keyless Lock Acknowledgment
When you push the LOCK button on
the remote transmitter or the
keyless access remote, some
exterior lights flash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the trunk
are locked and the security system
has set (see page
). You can
380
customize the exterior lights not to
flash and the beeper not to sound.
When you press the UNLOCK
button on the remote transmitter or
the keyless access remote to unlock
the driver's door/all the doors
(depending on the customize
setting), the exterior lights blink
twice to verify that the door(s) is
unlocked and the security system is
turned off.
To turn this feature on or off, follow
these instructions.
126
Table Of Contents
You can choose this item to
customize from ''DOOR/WINDOW
SETUP'' by pressing the INFO ( /
▼
) button repeatedly.
▲
2009 TL
Press the SEL/RESET button to
enter the selecting mode.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
▲ ▼
your selection by pressing the SEL/
RESET button.
Advertisement
Chapters
Table of Contents
