Table of Contents
Advertisement
How do you control the FM radio
How do you control the
FM radio
How to set AM / FM stations
To switch to AM / FM, FUNC button (19) repeatedly
until FM appears in the display.
The display shows the frequency and "((ST))" if the station is
received in stereo. You can at a weak signal in the menu
setting <Audio Setting> of <Stereo allowed> on <Forced
mono> provide. Strong rushing stereo transmitter you can
listen in better quality when you switch to mono reception.
Manual Tuning
Press I ,
station. The display shows the frequency. Each key press
changes the frequency in 0.05 MHz steps.
Automatic Tuning
Press I ,
button to start the automatic tuning. The display shows the
station frequency goes down / up.
I (7, 10) in FM to select the desired
I (7, 10) and hold down the
An FM station with sufficient signal strength is found, the
search stops and the station plays.
Note:
For the setting of weaker stations, please use the manual
tuning. Or set the menu setting <Scan setting> of <Strong
stations> on <All stations>.
How to store FM stations
The program memory can store up to 30 stations on the
FM band (VHF).
Note:
The preset stations are retained even when power fails.
•
Set the desired station.
•
With
/
(15) the space program.
•
Press MEM key (14) and hold "Preset Store" is
displayed. Bottom left of the program number is displayed.
Auto Memory
Press SCAN (8) and hold. A frequency scan starts,
the channels found will be stored automatically in sequence.
Advertisement
Table of Contents
