To operate the DAB radio
Manual tuning / tuning in DAB
•
Press the MENU button (17) and select by pressing
I ,
I (7, 10) <Manual tune>.
•
Confirm by pressing SELECT (16).
•
Press I ,
13 F, and their frequencies.
•
Is an ensemble found on one of the DAB channels, the
name on the display and the signal strength (level).
•
Press the SELECT button (16) to open the ensemble, the
first station of the ensemble is shown.
•
Press I ,
channels of the ensemble, press SELECT (16) to select the desired
station.
•
Press MENU (17), you can exit the menu.
I (7, 10) to cycle through the labels 5A to
I (7, 10) in order to cycle through the
1 2
•
mark 2.
•
sufficient signal.
•
as PTY program type, multiplex name, frequency, signal error rate, time, date.
How do you represent the software
version
•
Press the MENU button (17).
•
Select with you I ,
press SELECT (16).
•
Press I ,
appears and press SELECT (16).
•
Leave the menu using the MENU button (17).
How to display information
Press in DAB mode, press INFO (11), the following
screen appears:
The label 1 shows the required level. The signal strength is displayed in the
Transmitters whose signal strength is below the required level to send, no
Repeatedly pressing the INFO button (11) on by additional information, such
I (7, 10) <System> and
I (7, 10) to <SW version>