How Do You Connect The Power Cord - Dual DAB 43 Manual

How to prepare the unit for operation
How to connect an external audio source
You can listen to an external device (eg, CD player, DVD
player, AV receiver, iPod or other MP3 player) to play
through the speakers of this unit.
• Connect the audio output of your external device with an
audio cable (with 3.5 mm jack plug) to the AUX port (21) on the rear
panel.
• Press the mode selector switch FUNC repeatedly (19) until
AUX appears in the display.

How do you connect the power cord

• Plug the power cord into the power connector AC IN
(22) and the power cord into the outlet.
• After the initial preparation of the network connection
appears "Welcome to Digital Radio."
Caution!
When the device is connected to the mains voltage, are parts of
the device in operation. To turn the unit off completely, the
mains plug from the wall socket.
Note:
When not in use the plug from the socket. Pull the plug, not the
cord. Pull before the outbreak of a storm the power cord. If the
device is not used for a long time, eg before embarking on a
long journey, you pull the plug.