Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co,, Ltd
When entering other modes from configuration mode, the module will reconfigure parameters, AUX keeps low level
Note
during configuration;
After configuration completed, it outputs high level, so users are recommended to check the AUX rising edge.
6.8 Power Saving Mode (Mode 6)
Status
Transmitting
Receiving
Baud rate & air data rate
Advantage
Disadvantage
Applications
Note
6.9 Sleep Mode (Mode 7)
Status
M0=1 M1=1 M2=1
Transmitting
Transmitting is not available.
Receiving
Receiving is not available.
Others
Other functions of the module are closed, only can quit sleep mode by switching the M0, M1 and M2 status.
7.Instruction Format
In configuration mode（Mode 3：M0=1, M1=1, M2=0）, it supports instructions below.
(Only support 9600 and 8N1 format when setting)
No.
Instruction format
C0 + working
1
parameters
2
C1+C1+C1
Chengdu Ebyte Electronic Technology Co.,Ltd
Copyright ©2012–2019，
M0=0 M1=1 M2=1
Transmission is not available.
Receiving is available.
Under this mode, the baud rate and air data rate are independent, both receiver and transmitter can have
different baud rate but same air data rate.
The module works under WOR status, it wakes up periodically and monitors the wireless data packets, when
data packet monitored, the module enters receiving mode and receives complete data packets, and outputs the
data through serial port, and then enters WOR status again, which can save power consumption significantly.
Transmission is not available under this mode, the module must be switched to other mode for data
transmission.
Applicable for those devices which have requirement on power consumption and need to receive data.
It can only receive the data sent from the transmitter under mode 4.
C0 + 5 bytes working parameters are sent in hexadecimal format. 6 bytes in total and must be sent in
succession.
( Save the parameters when power-down )
Three C1 are sent in hexadecimal format. The module returns the saved parameters and must be sent in
succession.
E70-433T14S2 user manual
Illustration
15
Advertisement
Table of Contents
