Understanding The Monitor Led Displays - Rapsodo HITTING 2.0 User Manual

understanding the monıtor led dısplays
Front LED Display
The front LED display provides
information on the monitor status,
and will give the "green light" to
hit when the device is
ready to measure.
red light
Monitor is switched on,
but not ready to measure.
green light
Monitor is ready for hitting. When
appearing after blue light just after a hit:
data is ready to be viewed on app,
and ready for next hit.
blue light
Monitor is processing data after a valid hit.
Wait for the green light to appear which
should take only a few seconds.
5
''
not ready ''
''
pıtch ''
''
processıng ''
Rear LED Display
The rear LED display provides
information on connectivity and
battery. This display will be especially
important when pairing the app
with the monitor.
red light
Not connected to RCE, waiting for USB sync.
green light
Successfully connected to RCE through USB.
red flashıng light
Warning for low battery, please recharge monitor.
amber light
Switched off, and charging.
off
If USB is plugged into a charging device or PC,
it means the battery is fully charged.