Charging The Devices - Rapsodo HITTING 2.0 User Manual

Charging the devices

Charging the Monitor
The battery can be charged by connecting the included USB cable into
the port on the rear monitor panel
The rear LED will show AMBER indicating the monitor is charging
The rear LED will switch off indicating the device has been sufficiently charged
The LED indication will blink red indicating the battery charge is getting low and
the battery should be charged
Charging the RCE
The battery can be charged by connecting the included USB-C cable
to the USB-C charging port (located on the side of the power button)
The power LED will show AMBER indicating the monitor is charging
The power LED will switch off indicating the device has been sufficiently charged
The LED indication will blink red indicating the battery charge is getting low and
the battery should be charged
The monitor and RCE must be charged separately
to ensure a complete charge for each device
8