List Of Serial Commands; Table 8 List Of Serial Commands - Vaisala DRYCAP DMT152 User Manual

6. You may need to adjust the Local echo setting in the Terminal category to see what you
are typing on the serial line. To access the configuration screen while a session is running,
click the right mouse button over the session window, and select Change Settings... from
the pop-up menu.
5.1.3 List of Serial Commands
All commands can be issued either in uppercase or lowercase. In the command examples, the
keyboard input by the user is in bold type.
The notation <cr> refers to pressing the carriage return key (the Enter key) on your computer
keyboard. Enter a <cr> to clear the command buffer before starting to enter commands.
Note that the term quantity in the serial interface corresponds to measurement parameter.
Table 8 List of Serial Commands
Command
?
??
ACAL [1/2]
ADDR [0 ... 99]
AERR
ALARM
Description
Show device information
Show device information (overrides POLL mode)
Calibrate analog channel
Set the transmitter address for POLL mode
Set analog output device malfunction error mode
Set analog output limit alarm modes
Chapter 5 – Serial Line Operation
31