Other Commands; Opening The Transmitter In Poll Mode; Closing The Connection To A Transmitter In Poll Mode; Table 33 Open Command - Vaisala DRYCAP DMT152 User Manual

DMT152 User Guide
Syntax
Example:
aover on
: ON
The following example illustrates how the analog output is affected.
Channel 1 outputs T
d
command, the range is 0 ... 5.5 V (-80 °C ... -25 °C).
Note that the -30 °C T
5.8 Other Commands
5.8.1 Opening the Transmitter in POLL Mode
Use the OPEN command to connect to a transmitter that is in POLL mode.
Table 33 OPEN command
Syntax
OPEN [aa]<cr>
Example:
open 1
DMT152 1 line opened for operator commands
5.8.2 Closing the Connection to a Transmitter in POLL Mode
Use the CLOSE command to close a connection to a transmitter that is in POLL mode.
Table 34 CLOSE command
Syntax
CLOSE<cr>
Example:
close
line closed
50
with voltage output 0 ... 5 V (-80 °C ... -30 °C). After giving the AOVER ON
point is still at 5 V.
d
Description
Description
[aa] = address of the transmitter to connect to,
range: 0 ... 99.
Description
Closes the transmitter connection.
M210865EN-J