Miele F 2411 SF Operating And Installation Instructions page 93

Problems with the ice cube maker
Problem
The Ice Maker is not
producing any ice
cubes.
Frequently Asked Questions
Possible cause and solution
The appliance and/or the Ice Maker is not turned on.
 Turn on the appliance and/or the Ice Maker.
 Check whether the water filter has been inserted
correctly (see "Water filter", section "Changing the
water filter").
The plumbed water connection was not installed.
 Make sure that the plumbed water connection was
installed correctly.
The water intake is not open or has not been vented.
 Open the water intake.
 Check that the water supply has been vented.
There is a kink in the water hose.
 Check the water hose and replace it, if necessary.
The temperature in the Freezer Zone is too high.
 Select a lower temperature.
The appliance door has been opened too frequently,
causing the compressor to turn on more often and the
Ice Maker has iced up.
 Only open the door when necessary and for as
short a time as possible.
The water pressure is too low.
 Check that the water pressure is between 29 and
116 psi (2 and 8 bar).
 Check if an incorrect valve has been installed,
making the pressure too low.
Remember that it can take up to 10 hours for the
production of ice cubes to commence.
93