Switching Off Demo Mode; Resetting The Settings To Their Default Settings - Miele F 2411 SF Operating And Installation Instructions

Switching off Demo Mode 
Demo mode allows the appliance to
be presented in the showroom with-
out the cooling system being
switched on. Do not activate this set-
ting for domestic use.
If Demo mode has been switched on
as a default setting,  will show in the
display.
 In settings mode , use the  and 
arrow buttons to select
and select OK to confirm your selec-
tion.
Press OK for 4 seconds to deactivate
pears in the display.
 Follow the instructions on the display
and touch and hold the sensor con-
trol OK for 4 seconds.
The countdown
Demo Mode will deacti-
vate in seconds. will appear in the dis-
play.
Demo Mode deactivated. The appliance will
cool down. appears in the display.
 Confirm the message with OK.
The main screen appears in the display
again.
Selecting additional settings
Demo Mode
ap-
Resetting the settings to their
default settings 
You can reset the appliance's settings
to their default settings.
 In settings mode , use the  and 
arrow buttons to select
and select OK to confirm your selec-
tion.
 Use the  and  arrow buttons to
select Reset and touch OK to confirm
your selection.
After a brief delay,
pears in the display.
 Confirm the message with OK.
The initial start-up process restarts (see
"Starting up for the first time").
Factory Default
Settings Reset ap-
65