Miele F 2411 SF Operating And Installation Instructions page 64

Selecting additional settings
Activating Miele@home
If you have already activated
Miele@home and then disconnected
the connection, you can still reactivate
the connection.
 In settings mode , use the  and 
arrow buttons to select
and touch OK to confirm your selec-
tion.
 Use the  and  arrow buttons to
select Activate
firm your selection.
Activation successful
play.
 Confirm the message with OK.
If the WiFi connection is active,  will
appear in the display.
Checking the WiFi connection status
 In settings mode , use the  and 
arrow buttons to select
and select OK to confirm your selec-
tion.
 Use the  and  arrow buttons to
select Connection status
to confirm your selection.
Information about the WiFi connection
status will then appear in the display:
–  connected: there is a strong con-
nection,
–  connected: there is an average
connection,
–  connected: there is a weak con-
nection,
– : disconnected.
64
Miele@home
and touch OK to con-
appears in the dis-
Miele@home
and touch OK
Setting up Miele@home again
If you have changed your WiFi network,
you can set up Miele@home again for
your appliance.
 In settings mode , use the  and 
arrow buttons to select
and select OK to confirm your selec-
tion.
 Use the  and  arrow buttons to
select Set up again
confirm your selection.
Reset configuration?
play.
 Use the  and  arrow buttons to
select Yes or No
confirm your selection.
Miele@home
and touch OK to
appears on the dis-
and touch OK to