Switching On And Off - Miele F 2411 SF Operating And Installation Instructions

Switching on the appliance
 Open the appliance door.
 Turn the appliance on by pressing the
On/Off switch.



The appliance will start to cool and the
interior lighting will come on when the
appliance door is opened.
Miele will then appear on the main
screen in the appliance display.
The message Freezer temperature too
high. Max. temperature °F
the display when the appliance is
switched on for the first time and the
selected freezer temperature has been
reached.
An alarm tone sounds.
 Confirm the message with OK.
The message disappears from the dis-
play and the alarm tone stops.
However, the message may reappear
on the display after a brief delay.

0
°F
will appear in

Switching on and off

As soon as the selected freezer temper-
ature has been reached, the message
will disappear completely from the dis-
play and the alarm tone will stop.
To enable the temperature to get suf-
ficiently cold inside the appliance, al-
low the appliance to run for a few
hours before placing food in it. Do
not place food in the Freezer Zone
until it has reached the required cold-
ness (at least 0°F/-18°C).
Switching off the appliance
 Turn the appliance off by pressing the
On/Off switch.
The cooling and interior lighting are
switched off.
Please note: The appliance is not
disconnected from the power supply

when the on/off switch is in the "off"
position.
55