Connecting Your Device To The Computer - Navman Cruise Series User Manual

Connecting your device to the computer

1. Turn on your computer.
2. Plug the large end of the USB cable directly into a USB port on your computer (not a
USB hub) and plug the small end into the mini-USB connector on your Navman.
Note: Reset your device if it is not recognised correctly by your computer.
3. Before disconnecting your Navman from the computer, it is recommended to safely
remove the USB drive from the system. This prevents data loss on the device.
CAUTION: When your Navman is turned on and connected to a computer, it is recognised as
an external mass-storage device. Do NOT delete any files that are pre-installed on your Navman.
Deleting the files can cause your Navman to crash. Navman is not responsible for product quality
caused by file deletion.
13