Table of Contents
Advertisement
3.0
I
NSTALLATION
The furnace contains electrical parts and should be stored and used in indoor conditions as
follows:
temperature:
relative humidity:
3.1
Unpacking & Handling.
This furnace is heavy, take appropriate precautions when lifting or moving it and use a sufficient
number of people.
When unpacking or moving the furnace always lift it by its base. Never lift it by any attachments
or protruding parts. Avoid applying force to internal components such as the work tube or
insulation.
3.2
Packing List.
The packaging should contain the following components:
1 off
Furnace assembly.
1 off
Work tube and back seal assembly, see fig 2.
1 off
Work tube front insulating collar.
1 off
Work tube gasket.
1 off
Front tube seal assembly, see fig 3.
1 off
Door arm assembly (without door plug), see fig 4.
1 off
Door plug, see fig 4.
1 off
Flexible gas pipe.
1 off
Camera mounting bracket, see fig 5a.
1 off
Standard lens and camera assembly, see fig 5b.
1 off
Zoom lens assembly and lens clamp, see fig 5g.
1 off
Zoom lens mounting bracket.
6 off
Panel hole blanking plugs.
5 off
Cable ties.
1 off
Sample Carrier.
100 off Sample tiles.
1 off
Sample loading tool.
1 off
'Window retaining ring' spanner.
1 off
Cone mould.
1 off
150mm length of Gold wire (1063°C fuse wire).
1 off
150mm length of Palladium wire (1554°C fuse wire).
1 off
Carbon Monoxide monitor.
1 off
RS 232 Interface cable.
1 off
Camera video extension cable.
1 off
Computer.
1 off
Monitor.
1 off
Keyboard.
1 off
Mouse.
1 off
Carbolite software protection dongle.
2 off
Computer power cables.
1 off
Set - Trouble shooting discs.
1 off
Set - Computer operating instructions.
1 off
Installation, Operating & Maintenance Instructions for the CAF Test Furnace.
MF36
I
.
NSTRUCTIONS
5°C - 40°C
maximum 80% up to 31°C decreasing linearly to 50% at 40°C
Caf Digital Imaging
if supplied
if supplied
page 7
Advertisement
Table of Contents
