Advertisement
Quick Links
Installation, Operation &
Maintenance Instructions
An electrical alternative to the Bunsen burner
Developed in conjunction with the University of Sheffield School of Dentistry
This manual is for the guidance of operators of the above Carbolite product
and should be read before the unit is connected to the electricity supply.
section
Safe-Air
C
ONTENTS
1.0
Introduction
2.0
Installation
3.0
Operation
4.0
Maintenance
5.0
Environment
page
2
2
3
3
4
MF50
Advertisement
Related Manuals for Carbolite Safe-Air
Summary of Contents for Carbolite Safe-Air
- Page 1 An electrical alternative to the Bunsen burner Developed in conjunction with the University of Sheffield School of Dentistry This manual is for the guidance of operators of the above Carbolite product and should be read before the unit is connected to the electricity supply.
- Page 2 NTRODUCTION The Safe-Air The Safe-Air is designed for use as a safe heat source for a variety of medical and industrial applications where it can often replace a Bunsen burner, thereby minimising the risk of igniting inflammable items such as latex gloves. It produces of stream of air, electrically heated to approximately 400°C.
- Page 3 Avoid burns caused by touching the nozzle or holding a hand in the hot air stream. Be careful even when wearing gloves, as burns can be caused by delayed heat transfer through a glove. Do not use the unit in the presence of potentially explosive vapour: use of the safe-air near volatile materials can be dangerous.
- Page 4 Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)330 088 0560 Fax: +44 (0)1245 808399 Email: sales@keison.co.uk...