Multipoint Mobile Phones Pairing; Bluetooth Stereo Device Pairing - Caberg JUST SPEAK EVO User Manual

JUST SPEAK EVO

Multipoint Mobile Phones Pairing

You can simultaneously use two mobile phones which use the mobile
phone profile.
1. You can pair the first mobile phone to the JUST SPEAK EVO by
following the simple procedures in "Mobile Phone Pairing".
2. To pair the second mobile phone, press and hold the (–) Button for
5 seconds until the red LED is rapidly flashing and you hear multiple
beeps.
3. Within 2 seconds, press and hold the (+) Button for 1 second, then
the LED turns to blue flashing and the beeps turn to high tone double
beeps. You will hear a voice prompt saying "Multipoint pairing".
4. Search for Bluetooth devices on your mobile phone. Select the
Caberg JSE in the list of the devices detected on the mobile phone.
5. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
6. The mobile phone confirms that pairing has completed and the JUST
SPEAK EVO is ready to use. You will hear a voice prompt from the
JUST SPEAK EVO saying "Your headset is paired".
12
1st Mobile Phone
Mobile Phone
Pairing
HFP
+
A2DP
JUST SPEAK EVO
Multipoint Mobile Phones Pairing

Bluetooth Stereo Device Pairing

1. If the Bluetooth stereo device is integrated with the mobile phone
such as smartphones, you don't need to pair the JUST SPEAK EVO
with it separately. When the JUST SPEAK EVO is paired with the
mobile phone, it is also paired as a stereo music device.
2nd Mobile Phone
Multipoint
Pairing
HFP