Caberg Just Speak Evo Assembly Instruction

For freeride and ghost helmets
Hide thumbs Also See for Just Speak Evo:

Advertisement

ASSEMBLY
INSTRUCTION
1.
2.
3.
4.
Remove the inner linings as
indicated in the communicator's
user manual.
Place the right speaker (R) in its
seat on the velcro.
Repeat the operations performed
for the right (R) speaker for
positioning the left (L).
Place the microphone base under 
the chinstrap between EPS and
shell. Use the additional microphone 
support included by positioning it 
as the image.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Just Speak Evo and is the answer not in the manual?

Questions and answers

Summary of Contents for Caberg Just Speak Evo

  • Page 1 ASSEMBLY INSTRUCTION Remove the inner linings as indicated in the communicator’s user manual. Place the right speaker (R) in its seat on the velcro. Repeat the operations performed for the right (R) speaker for positioning the left (L). Place the microphone base under  the chinstrap between EPS and shell. Use the additional microphone ...
  • Page 2 ASSEMBLY INSTRUCTION Adjust the microphone’s position by deforming its boom. WARNING: check that the triangle on the microphone is facing the mouth. Assemble the inner linings making sure that the microphone, remote control and USB cable are accessible from outside the helmet. Place the USB socket between the inner linings and the shell.

Table of Contents