Pairing And Using The Just Speak Evo With Bluetooth Devices; Mobile Phone Pairing - Caberg JUST SPEAK EVO User Manual

Function
Music
* You can use "Voice Dial" and "Redial" only in stand-by mode.
Operations
1 sec.
2 sec.
2 sec.
5. PAIRING AND USING THE JUST SPEAK EVO
WITH BLUETOOTH DEVICES

Mobile Phone Pairing

1 Turn on the JUST SPEAK EVO and press and hold the (+) Button for 5
seconds until the LED flashes red and blue alternately and you hear
multiple beeps. You will hear a voice prompt saying "Phone pairing".
2. Search for Bluetooth devices on your mobile phone. Select the
Caberg JSE in the list of the devices detected on the mobile phone.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone confirms that pairing has completed and the JUST
SPEAK EVO is ready to use. You will hear a voice prompt from the
JUST SPEAK EVO saying "Your headset is paired".
5. If the pairing process is not completed within three minutes, the JUST
SPEAK EVO will return to stand-by mode.
JUST SPEAK EVO
11