7.4.1 Analog Output Channels
The MCT has three analog output channels providing both milliamps and voltage
signals. These channels may be designated to the constituent using an RS 232
command. The default designations are as follows:
Single Constituent Mode
#
Analog 1
Analog 2
Dual Constituent Mode
#
Analog 1
Analog 2
Analog 3
Triple Constituent Mode
#
Analog 1
Analog 2
Analog 3
Refer to the User Terminal Drawing located in Section 11.0 for the location of the
terminals for the analog signals.
7.5 Calibration Routine
Format
Isolated
Isolated
Format
Isolated
Isolated
Isolated
Format
Isolated
Isolated
Isolated
Constituent #
1
1
Constituent #
1
2
Selectable for 1 or 2
Constituent #
1
2
3
18