Main Menu Selections - Process Sensors MCT Series Installation And Operation Manual

Press the Grab Sample key a third time to exit the routine or wait 10 seconds and it will exit
automatically. Press Display Rotate to return to the 'Home' screen.

7.2. Main Menu Selections

The menu selections of each constituent are as follows:
Online (Home)
Calibration Parameters
Calibration Routine
Diagnostics
Miscellaneous
The display will normally start from the Online selection.
Pressing the DOWN/UP arrow key will scroll the display through the menu selections.
Pressing the RIGHT arrow will allow entry to the selected menu.
Pressing the LEFT arrow ONCE will get back to the menu selection, pressing TWICE will get back to
the HOME display.
The following sections give a detailed description of the various menu choices available to set-up and
calibrate the MCT using the operator display and interface.
Press the DOWN arrow to select the desired menu field. To access this selection, press ENTER. All
menus except Diagnostics are protected by a password.
13