Wall-Mounting The Ap - HP JH306A Quick Start Manual

The HP 525-R is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g/n/ac product. The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.

Wall-mounting the AP

1. Mark four mounting holes on the wall.
Figure 5 Marking four mounting holes on the wall
2. Drill 8 mm (0.32 in) diameter holes at the marked locations and use a
hammer to tap the wall anchor into the wall until it is flush with the
wall surface.
Figure 6 Installing the wall anchor
3. Use the wall anchors to attach the mounting bracket to the wall.
150 mm
5.91 in
≥60 mm
(2.36 in)
(1.89 in)
8
48 mm