Advertisement
Available languages
Available languages
2 English
Contents
1.
Introduction ......................................................................................................................................................... 2
2.
In general ............................................................................................................................................................ 2
3.
Ranges of application .......................................................................................................................................... 2
4.
Operation ............................................................................................................................................................ 3
5.
Servicing ............................................................................................................................................................. 3
6.
Guarantee regulations ......................................................................................................................................... 3
7.
Security tips .......................................................................................................................................................... 4
8.
Recognising and repairing of mistakes ............................................................................................................... 5
9.
Notes on Product Liability ................................................................................................................................... 5
10.
Notes on Disposal ............................................................................................................................................... 5
11.
EU Declaration of Conformity .............................................................................................................................. 5
12.
Technical Data ................................................................................................................................................... 10
1. INTRODUCTION
We would like to congratulate you on the purchase of our pump. We appreciate your trust. That's why funtional secu-
rity and operational safety stands by us on first place.
To prevent damage to persons or property, you should read this user manual carefully. Please
observe all safety precautions and instructions for proper use of the pump. Failure to follow the
instructions and safety precautions can result in injury or property damage.
Please keep this manual with the instructions and safety instructions carefully in order to at any
time you can restore them. Please always download the latest version of the user manual of www.
profi-pumpe.de under „downloads". This shall always prevail.
2. IN GENERAL
The pumps are developed according to the newest stand of technology, manufactured with much care and go under
strict intensive controls.
The pumps were optimised by us in particular for their special demands. Make sure after unpacking the pump that
the data given on the type label agree with the included operating instructions. In the case of doubt the pump is not
to be used. Transport damages are immediately to be reported to the package distributor and to us in witten form.
3. RANGES OF APPLICATION
These pumps are made for pumping clean and dirty water. Free of abrasive components (sand, mud, aggressive
chemical substances). The water may have to be prefiltered up to the particle size specified in the technical data.
The pumps are made for the following ranges of application:
l Filling and emptying rain tanks and containers
l For water re-circulation
l For rainwater use in house and garden
l Pumping water from a brook a stream
l Use in a pond
l Others
The pumps are designed for pumping water and chemically non-aggressive liquids. Any guarantee is void in case of
improper use. They are not suitable for pumping flammable liquids or for use in places where there is danger of an
explosion. The pumps are designed for home use in the house and garden.
In continuous operation mode, the lifetime will be shortened accordingly. Never run more than 5 minutes against a
closed valve pump. Save the pump against dry running (install dry run protection).
Never start and stop the pump more than 20 times per hour. When the pump clocks, any claim under warran-
ty is void. Not suitable for use with solar photovoltaic panels.
Submersible pumps may not be used in swimming pools.
4. OPERATION
The installation must be performed by a qualified professional.
Please, check each time before using, the electrical connections and the cables are not damaged. Check
before the installation whether the electrical connections are earthed according to the statutory regulations
and are installed. The pump is to be secured through a RCD circuit breaker with release current of 30 mA.
is technically correct, so this warranty is void. It must be ensured that the pump is sufficiently cooled during
prolonged operation.
It is not recommended to perform even cable extensions or other technical modifications. The lines to the pump must
be installed always steadily rising. A transfer of mechanical loads or vibrations from the pump or must be eliminated
through appropriate measures (rubber buffers, braided hoses, line fixation, etc.).If necessary, attach a sufficiently
long and strong rope to the attachment points provided before using the pump. The pump is hung into the water tank
with this retaining cable.
Note: The condition of the holding rope should be checked regularly, as it can age over time and may
tear if necessary.
l Connect the pressure line:
For occasional use a suitable water hose can be used.
For permanent installation, it is recommended to connect a reinforced hose.
l Mount the pressure line on the pressure connection. All threaded connections must be sealed with a suitable
sealing tape (e. g. Teflon® tape).
l When using a hose, screw a suitable hose adapter onto the pressure connection, slide the hose firmly onto the
hose adapter and secure it with a hose clamp.
l For the maximum immersion depth, please refer to the technical data (page 8).
l Make sure that the intake openings are not blocked by foreign bodies. If necessary, place the unit on a firm, level
surface.
l Make sure that the device is securely attached.
5. SERVICING
Under normal pumping conditions the pump requires no servicing. From an operating period (with clear water)
of approx. 2000 hours the mechanical components should be checked: impeller wheels, chambers, sealing
rings etc. on wear and if necessary be changed. After 3000 pumping hours the oil in the chamber should also
be changed, if necessary (only with oil-dipped engine types!). Please, only fill it up to 80% and check the
sealing rings always for density.
With abrasive materials like sand the servicing duration can become shorter.
The following controls should be carried out regularly:
l Intactness of the electric cable
l That the connection hoses are not bent or broken
l Cleanness of the pump medium
Moreover, the pump should be emptied with risk of frost, be washed out with clear water and stored dry.
6. GUARANTEE REGULATIONS
For all manufacturing and material defects, the statutory warranty applies. In these cases we take the replacement
or repair of the pump. Shipping costs shall be borne by our company, except as required by law. Please report the
warranty on our service platform http://www.profi-pumpe.de/service.php. We will inform you how to proceed with
case-related. Returns please sufficient postage. Unfortunately not prepaid returns can not be accepted because they
are filtered out before delivery. Our service we provide in Germany.
The warranty does not cover:
l Material wear (sealing rings, impeller wheels, impeller chambers)
l Unjustified interventions or changes in the pump
l Damages by selffault
l Improper servicing and improper use
l DRY RUNNIG (Also partially!) of the pump
Moreover, we give no damage compensation for secondary damages!
English 3
IMPORTANT!
Advertisement
