Safety Rules For Tools - Acra 46SF Instruction Manual

As with all machinery there are certain hazards involved with operation and use of the machine.
Using the machine with respect and caution will considerably lessen the possibility of personal
injury. However, if normal safety precautions are overlooked or ignored, personal injury to the
operator may result.
This machine was designed for certain applications only. We strongly recommends that this
machine NOT be modified and/or used for any application other than for which it was designed. If
you have any questions relative to its application DO NOT use the machine until you contact with
us and we have advised you.
Your machine might not come with a power socket or plug. Before using this machine, please
Do ask your local dealer to install the socket or plug on the power cable end.
A. USER:
1. WEAR PROPER APPAREL. No loose clothing, gloves, rings, bracelets, or other jewelry to
get caught in moving parts.
Non-slip foot wear is recommended. Wear protective hair covering to contain long hair.
2. ALWAYS WEAR EYE PROTECTION. Refer to ANSLZ87.1 standard for appropriate
recommendations.
Also use face or dust mask if cutting operation is dusty.
3. DON'T OVERREACH. Keep proper footing and balance at all times.
4. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting
tool is accidentally contacted.
5.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't leave
tool until it comes to a complete stop.
6. DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drug,
alcohol or any medication.
B. USE OF MACHINE:
1. DON'T FORCE TOOL. It will do the job better and be safer at the rate for which it was
designed.
2. USE RIGHT TOOL. Don't force tool or attachment to do a job for which it was not designed.
3. SECURE WORK. Use clamps or a vise to hold work when practical. It's safer than using your
hand frees both hands to operate tool.
WARNING: FAILURE TO FOLLOW THESE RULES
MAY RESULT IN SERIOUS PERSONAL INJURY
SAFETY RULES FOR ALL TOOLS
3