Table of Contents
Advertisement
(4) Turn the handle downwards, when the spindle leaving 1
start button A, spindle will begin to run and prepare for tapping.
(5) When reaching the bottom of your tapping depth, the spindle will reverse automatically. Release
the handle, the spindle will return upwards to its original position, then stop running.
(6) CAUTION: When in emergency or tapping drill was stuck in the tapping hole. Punch the
EMERGENCY switch F to stop the spindle running. Use button C for instant reverse of the
spindle.
(7) After finishing your tapping work, remember to turn the select switch B to "NEUTRAL"
position.
(8) E is coolant pump switch.
(9) D is power indicator.
14. SPECIFICATION OF T-SOLT
The size of T-Solt on table as Fig 6:
st
limit switch (hear the sound), push the
Fig. 3
RF-46BSF
14
Fig. 6
Advertisement
Table of Contents
