Table of Contents
Advertisement
(12) Quill handle rod-can lock the spindle at desired position.
(13) Chuck guard.
(14) Switch.
(15) Pump.
(16) Adjusting the head height by loosening the head body fix bolt, and turning the head handle.
6. PRECAUTION FOR OPERATION
Check all parts for proper condition before operation; if normal safety precautions are notice carefully,
this machine can provide you withstanding of accurate service.
(1) Before Operation
(a) Fill the lubricant.
(b) In order to keep the accurate precision, the table must be free from dust and oil deposits.
(c) Check to see that the tools are correctly set and the work-piece is set firmly.
(d) Be sure the speed is not set too fast.
(e) Be sure everything is ready before use.
(2) After Operation
(a) Turn off the electric switch.
(b) Turn down the tools.
(c) Clean the machine and coat it with lubricant.
(d) Cover the machine with cloth to keep out the dust.
(3) Adjustment of Head
(a) Head may be rotated 360" by loosening the two heavy duty head lock nuts. Adjust the head to the
desired angle, then fix the heavy duty head lock-nuts. It is tighten the same time to fix the head if
drilling & milling too much.
(b) Unscrew 3 nuts while the wock-piece needs to be bevel drilled turn to the degrees you wish on
the scale, then screw the 3.
10
Advertisement
Table of Contents
