Network Access; Ir Control; Specifications And Dimensions - Bryston BDA-3.14 Owner's Manual

Network Access

You may connect your BDA-3.14 SVC Ethernet port
to your local area network using CAT5 or better
cable to facilitate use of the built in web-based
user interface or to control and monitor the unit
using an automation system. Once connected to
the network, you may access the web user interface
with a web browser by entering the IP address
into the address bar. For web browsers that do not
support zeroconf networking (Android phones,
etc.), you may identify the numerical IP address of
your player by using the LEDs above each of the 10
input buttons. Opto represents numeral 0 and USB2
represents numeral 9.
1. Press an unused input button (except USB2)
5 times. The first digit in your IP address will
light amber.
2. Press USB2 to see subsequent digits. The
decimals in an IP address result in no LEDs
lit.
3. Press the power button to return the front
panel to normal operation.
Example: the IP address 192.168.3.4 will show
amber LEDs above the following inputs one at a
time in order:
HDMI 1, USB 2, HDMI 2, (blank), HDMI 1, SPDIF 2,
USB 1, (blank), HDMI3, (blank), HDMI4

IR Control

You may control the BDA-3.14 with the included
remote control.
To use a Bryston BR2 with the BDA-3.14, press the
D/A button. You can use the BR2 to select the inputs
SPDIF 1 and 2, TOSLINK, AES/EBU, and USB1. You
can also set upsampling on or off. The BR2 will not
Sample Rate
44K1
88K2
BDA-3 D/A CONVERTER
176K4
352K8
BDA-3.14 Streamer / DAC
19" Version
17" Version
48K0 DSD 1X
96K0 DSD 2X
192K0 DSD 4X
384K0 LOCK
UPSAMPLE OPTO HDMI 1 HDMI 2 HDMI 3 HDMI 4 SPDIF 1 SPDIF 2 AES USB 1
let you select the HDMI inputs or USB2.
To program a universal remote, use the following
codes:
015 Select HDMI 1
016 Select HDMI 2
017 Select HDMI 3
018 Select HDMI 4
028 Select USB 1
014 Select USB 2
021 Select Opto
023 Select SPDIF 1
024 Select SPDIF 2
027 Select AES/EBU
029 Toggle Power

Specifications and Dimensions

Output
Voltage
Frequency
Response
Noise
IMD
THD + Noise
Weight
Dimensions
(See Diagram)
2.800
3.325
USB 2
031 Power ON
032 Power OFF (STBY)
030 Toggle Upsample
033 Upsample ON
034 Upsample OFF
035 HDMI1 Pass through
036 HDMI2 Pass through
037 HDMI3 Pass through
034 HDMI4 Pass through
241 Enable ext. trigger
242 Disable ext. trigger
Balanced: 4.0V
Single Ended: 2.0V
20Hz - 20kHz: ± 0.1dB
Balanced Out: -140dB
Single Ended Out:
≤0.0003%
20Hz-20kHz : ≤0.002%
4kg | 8.75lbs
Inches: 17 or 19 W x 3.325 H x 11.53 D
Cm: 43. or 48.3 W x 8.5 H x 29.3 D
11.53
17