Front Panel - Bryston BDA-3.14 Owner's Manual

3. Expand the Tidal and/or Qobuz menu. Enter
your login and password for the respective
service and choose the sound quality level
that corresponds with your subscription.
Click Save.
Internet Radio
Internet Radio is accessible through Radio in Default
View. Stations are sorted by genre and subgenre.
Each station's streaming bitrate is indicated so
you can gauge sound quality. Radio Paradise is a
listener supported popular eclectic station which is
available in lossless FLAC streaming. This station is
accessible through Radio as well with a special link.
You may use any one, all, or any combination of
these elements in your music library. They are all
accessible from the Media Player Default View.
In fact, you can add music to your Now Playing
queue from any of these sources at once so that, for
example, your playlist may contain songs from your
local library, Tidal, Qobuz, and perhaps finish with
an internet radio station to keep music going after
your specially selected playlist is exhausted.
10

Front Panel

1. Power / Standby
Press this button to toggle the BDA-3.14 on or
into standby mode.
Unlit BDA-3.14 is not receiving power. Plug unit
into AC mains power.
Red Plugged into AC Mains but in standby
mode.
Green BDA-3.14 is on and operational.
Blinking Secondary power supply failure. Contact
Red Bryston technical support.
2. Input Selector
Ten input select buttons each have
corresponding LEDs above them. Each button is
labeled with a name corresponding to an input
on the back panel. Pressing an input button
activates that input and the BDA-3.14 receives
digital audio from the source component
connected to that input. The input's LED will
light green when active and receiving audio and
will light red when active but no audio is present
on that input. Only one input can be active at
a time. Input 1 (Optical / Streaming) can be
toggled between the optical input on the rear
or the internal streamer. When lit yellow, the
streamer is selected.
3. Upsample / Mute
Press to toggle an optional upsampling mode.
When engaged, the internal sample rate
converter upsamples incoming 44.1kHz and
88.2kHz digital audio to 176.4kHz. In this mode,
the upsample LED lights amber. All 48kHz
and 96kHz digital audio upsamples to 192kHz
and the LED lights green. When disengaged,
the LED is not lit. The Upsample feature does
not affect the internal streamer, HDMI or USB.
When upsample is lit RED, it indicates the unit is
muted.
4. Lock Indicator
Check that the BDA-3.14 is properly