Atari Lynx FlashCard User Manual page 22

History:
Firmware:
1.01: (not avaliable for download – only used with PCB V1.271)
st nd
First released Firmware for the FlashCard. (1 and 2 run FlashCards)
1.10: (not avaliable for download – only used with PCBs V1.27x and V1.3a4)
- add Byte modify for 93C46
th
- add demo for 20 anniversary FlashCards
- activate time out routine for erasing Flash Memory
- remove one mistake in dutch language
- optimize code
1.11: (available for download – not possible to use with PCB V1.3d4)
- fix write and read bug with 93C46 from manufacturer CSI
- improve erase count routine for 93C46
- bug fix using green LEDs while verify
- bug fix sometimes red status LED do not switch off after verify failt
- optimize erase and time out routine for erasing Flash Memory
1.14: (not avaliable for download – only used with PCB V1.3d4)
nd
- add routine for use of 2 FlashRom with PCB V1.3d4
1.15: (not avaliable for download – only used with PCB V1.3d4)
- bug fix verify routine for 93C46
1.20: (available for download)
- add o-file support
- optimize code
1.40: (available for download)
- Menu Content
- Auto Size-mode for .lnx-files
- Menu changes
- Can modify 93C46 up to 128 Bytes at once
- Bank mode for 1.3d4 FlashCards
Seite - 22 -